What is a Real Time Spectrum Analyzer (RSA/RTSA)?

common problems 5670

Real-time spectrum analyzers can collect data in the time domain and then convert it to the frequency domain using the Fast Fourier Transform (FFT). Real-time spectrum analyzers can quickly capture transient and fast signals.

Previous. NEXT STORY.

Recommended

  • How to use an arbitrary waveform generator?

    550

    Using an arbitrary waveform generator, test engineers can verify the design of a circuit in just a few steps: (1) activate the output control; (2) select the waveform to be generated; (3) connect the output to the device under test; and (4) verify the performance of the device under test using an oscilloscope. The following is an example of the design of the output control circuit.

    View Full Version
  • What is the importance of waveform sequencing?

    519

    Waveform sequencing lets you create multiple configured waveforms that contain multiple common segments. Sorting lets you build complex, long waveforms using as little instrument memory as possible. Waveform sequencing lets you save storage capacity by replaying shorter waveforms at different locations on the signal as needed. Many tests require long waveform memory records. The required record length...

    View Full Version
  • What is voltage?

    455

    What is voltage? An easy-to-understand explanation of the difference from current and knowledge of units of measurement ■ Outline When using electronic equipment, you need to have a clear grasp of current, resistance, and voltage. However, there are many people who only know these words and do not understand them in detail. Here, we will explain in layman's terms what the definition of voltage is, what the difference between current and potential is,...

    View Full Version
  • How does a vector network analyzer work?

    551

    A network analyzer consists of a signal source and a receiver. The receiver will detect changes in the output signal of the device (or network) and then compare it to the source signal fed into the device. To evaluate the effect of the device on current and voltage, the VNA measures the resulting amplitude and phase response. This results in transmission and reflection measurements, impedance and s-parameters, which can be used by the test engineer to...

    View Full Version

Hello!sign in

Click to cancel reply
    Expand More

    Product consultation and purchase:18218718851

    I already understand