Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
TH2810D type LCR digital bridge is the company's latest development of low-frequency component measurement of the new generation of products, which applies a number of component measurement of the latest technology, large character LCD display, the use of SMT chip technology, easy to operate, beautiful appearance. It can meet the needs of production line quality assurance, incoming inspection and automated production. TH2810D is a low-cost LCR digital bridge introduced by Changzhou Tonghui, adopting TH26004-1 four-end Kelvin test cable plus TH26001A four-end test fixture and short-circuit chip in the fixture, with an accuracy of 0.1% and an internal resistance of 30/100 ohms. In addition, there are a wealth of interfaces, RS-232 and HANDLER interface, etc., can be connected to the computer communication and automated testing.
| Measurement Functions | |
| test parameter | L-Q, C-D, R-Q, |Z|-Q |
| Fundamental Accuracy | 0.1% |
| equivalent circuit | Series, Parallel |
| Measurement range | Automatic, Hold |
| trigger method | Internal, Manual, External |
| Test speed (1kHz) (times/sec) | Fast: 12, Medium: 5.1 Slow: 2.5 |
| calibration function | Open/short circuit, sweep to zero |
| Test Side Configuration | 5-end |
| Test Signal | |
| Test Signal Frequency | 100Hz,120Hz,1kHz,10kHz,±0.01% |
| Output Impedance | 30 Ω , 100 Ω |
| Test Signal Level | 0.1Vrms,0.3Vrms, 1Vrms |
| Measurement display range | |
| |Z|, R | 0.1 mΩ - 99.99 MΩ |
| C | 0.01pF - 99999μF |
| L | 0.01μH - 99999H |
| D | 0.0001 - 9.9999 |
| Q | 0.0001 - 9999.9 |
| Δ% | -999.99% - 999.99% (TH2811D none) |
| demonstrate | |
| Display mode | Direct Read, Δ%,ΔABS |
| Large character LCD display with backlight | |
| monitor (computer) | Primary and secondary parameters: 5 digits |
| comparator | NG,P1,P2,P3,AUX,5-position selector and alarm by position. |
| connector | RS232C, Handler |
■ 4 frequencies 100Hz, 120Hz, 1kHz, 10kHz
■ Basic accuracy: 0.1%
■ Test speed: as fast as 83ms
■ 5-speed sorting, PASS/FAIL indication
■ Rational combination of simplicity of operation and powerful functions
■ SMT surface mount process
■ Good reading stability
■ 30Ω, 100Ω two kinds of output impedance
■ Equipped with HANDLER interface, RS232C interface with optional operating software
| standard equipment | |||||
| Accessory Name | model number | ||||
| Four-end fixture | TH26001A | ||||
| short circuit board | TH26010 | ||||
| Four-terminal Kelvin Test Leads | TH26004S-1 | ||||
| optional | |||||
| Accessory Name | model number | ||||
| Magnetic Ring Fixture | TH26008A | ||||
| Patch Test Leads with Boxes | TH26009B | ||||
| Patch Test Leads with Boxes | TH26029B | ||||
Recommended
