TH2882A-3 脉冲式线圈测试仪
model number | TH2882A-3 |
Output pulse voltage | 300V-3000V±5%, 50V步进 |
Voltage control method | Normal: programmed for constant voltage when the test terminal is open: voltage is automatically controlled, independent of winding impedance |
Test Range | single phase (elec.) |
pulse energy (physics) | ≤90 milli-joules |
Inductance Measurement Range | ≥10μH |
monitor (computer) | 320 x 240 dot LCD screen, 240 x 200 dot waveform display |
Display content | Setting parameters, standard and measured waveforms, measuring and comparing results |
Waveform Sampling | Maximum 40 MSPS sample rate, 8-bit, 960 points |
Input Impedance | 10MΩ (resistive voltage divider) |
Measurement speed | 5.5 times/second (waveform display OFF),3.3 times/second (waveform display ON) |
Display waveform measurement | Voltage, Time, Frequency |
trigger method | Internal/manual (foot control)/external/bus |
way of comparing | Area comparison, area difference comparison, corona discharge, phase difference comparison |
Measurement repeatability | ±1% |
discriminant output | PASS/FAIL Display, Alarm |
memory (unit) | The instrument can internally store 60 groups of standard waveforms USB disk can store 500 groups of standard waveforms |
connector | HANDLER,RS232C,GPIB(Option) |
■ 脉冲电压输出:300V-3kV 50V步进 仅单相
■ 电感测试范围:≥10μH
■ Test speed: single-phase up to 5.5 times / sec (waveform OFF)
■ Maximum 40Msps sampling rate
■ Four waveform comparison methods
■ 320 x 240 dot matrix graphic LCD display
■ Chinese and English operation interface
■ Programmable multiple trigger methods
■ Voltage, time and frequency measurement functions
■ Handler, RS-232C, USB host, GPIB (option) interface
■ USB disk for storing 500 sets of standard waveforms
standard equipment | |||||
Accessory Name | model number | ||||
High Voltage Test Lines | TH2883-01 | ||||
Foot-activated switch | TH2881-001 |
optional | |||||
Accessory Name | model number | ||||
TH10001GPIB Interface Board | TH10001 | ||||
TH2818-USB Main Control Board | TH26025 |