● Simple realization of protective continuity testing in compliance with various safety standards and regulations in Japan and overseas. Measurement of protective continuity resistance of medical and general electrical equipment, grounding inspection of electrical work equipment and switchboard installation, inspection of protective grounding and equipotential grounding of medical equipment, and evaluation of the contact status of high-current flow.
● Constant current feedback control that does not vary with the load can be added.
● After confirming the connection to the device under test, the current addition software starts.
The main unit cannot measure alone. Please purchase the optional 9296 current probes (2), or 1 each of the 9296 current probe and 9297 current plus probe for the appropriate measurement purpose.
Basic parameters
| Basic Measurement Functions | AC 4-terminal method low resistance measurement |
|---|---|
| demonstrate | Fluorescent picture tube (digital display) |
| Setting current range | AC 3.0 A to 31.0 A, Resolution: 0.1 A (0.1 Ω resistive load) |
| Maximum output power | 130VA (at output terminals) |
| Open Port Voltage | AC 6V or less |
| frequency | 50Hz or 60Hz sine wave (settable) |
| Resistance Measurement Range | 0 to 1.800Ω (0.001Ω resolution), Accuracy: ± (2% rdg. +4dgt.) (after zeroing) |
| Voltage measurement range | 0~6.00V (single range 0.01V resolution), Accuracy: ±(1% rdg. +5dgt.) |
| monitor | AC0~35.0A/AC0~6V,2 times/sec. |
| chronograph display | When measurement starts, display counting backward from the set time or displaying elapsed time |
| Timer Setting | 0.5s~999s |
| comparator | Judge according to the upper and lower limit settings, beep or output the comparison result |
| memory function | Storage of test settings, max. 20 groups |
| connector | EXT I/O, EXT SW, GP-IB or RS-232C (option) |
| power supply (of an appliance etc) | AC 100~120V/200~240V (automatic switching, 50/60Hz) |
| Volume and weight | 320W x 90H x 263T mm, 7kg |
| attachment (email) | Power cord × 1, instruction manual × 1, spare fuse (built-in socket) × 1, short-circuit protection bar × 2 |
Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.











