Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
The APS-7000 series is not only a high-precision AC power supply, but also a powerful analyzer with a wealth of features suitable for testing and characterizing power supplies, electrical equipment, components and modules. In addition to AC power supplies, the APS-7000 series can fully simulate different power outputs. Sequences can be created using arbitrary waves and voltage or frequency sweeps. Voltage, current, power, frequency, load power factor and load peak factor are monitored in real time. All parameters, values and measurement results can be displayed simultaneously on the 4.3'' TFT-LCD screen.
APS-7000 Series Serial Functionshttps://v.youku.com/v_show/id_XNDYyMTc4NjA0MA==.html
Introduction to APS-7000 Series AC Power Supplieshttps://v.youku.com/v_show/id_XNDYyMTc4NTY2NA==.html
AC Power Supply APS-7000 - Introduction to Simulate Modehttp://v.youku.com/v_show/id_XMTQxNjExNzM1Ng==.html?spm=a2hzp.8253869.0.0
AC Power Supply APS-7000 - SurgeDip Control Functionhttp://v.youku.com/v_show/id_XMTQxNjA4NDc3Mg==.html?spm=a2hzp.8253869.0.0
AC Power Supply APS-7000- Arbitrary Waveform Editing Function Introductionhttp://v.youku.com/v_show/id_XMTQxNjA3NTk4MA==.html?spm=a2hzp.8253869.0.0
AC Power Source APS-7000 - Sequence Function Introductionhttp://v.youku.com/v_show/id_XMTQxNjAyNjcxNg==.html?spm=a2hzp.8253869.0.0
AC Power Source APS-7000 - Program Mode Introductionhttp://v.youku.com/v_show/id_XMTQxNTkwNjIyNA==.html?spm=a2hzp.8253869.0.0
AC Power Supply APS-7000 - Ipeak Measurement Introductionhttp://v.youku.com/v_show/id_XMTQxNTkwMTk3Ng==.html?spm=a2hzp.8253869.0.0
APS-7000 Operation Video https://v.youku.com/v_show/id_XNDkyNDg1MjYyMA==.html
Quick Selection
| model number | output power | output frequency | output voltage | Maximum current | Standard Interface |
| APS-7050 | 500VA | 45-500Hz | 0-155Vrms/0-310Vrms | 4.2A/2.1A | USB/LAN |
| APS-7051 | 500VA | 45-500Hz | 250/500/1000Vrms | 2.5A/1.25A/0.67A | USB/LAN |
| APS-7100 | 1000VA | 45-500Hz | 0-155Vrms/0-310Vrms | 8.4A/4.2A | USB/LAN |
| APS-7101 | 1000VA | 45-500Hz | 250/500/1000Vrms | 5A/2.5A/1.25A | USB/LAN |
| APS-7200 | 2000VA | 45-500Hz | 0-155Vrms/0-310Vrms | 16.8A/8.4A | USB/LAN |
| APS-7300 | 3000VA | 45-500Hz | 0-155Vrms/0-310Vrms | 25.2A/12.6A | USB/LAN |
| Detailed specifications | |||
| model number | APS-7050 | APS-7100 | |
| rating | 500VA | 1000VA | |
| output voltage | 0 ~ 310.0 Vrms | 0 ~ 310.0 Vrms | |
| output frequency | 45.00 ~ 500.0 Hz | 45.00 ~ 500.0 Hz | |
| Maximum current (r.m.s) | 0 ~ 155 Vrms | 4.2 A | 8.4 A |
| 0 ~ 310 Vrms | 2.1 A | 4.2 A | |
| Maximum current (peak) | 0 ~ 155 Vrms | 16.8 A | 33.6 A |
| 0 ~ 310 Vrms | 8.4 A | 16.8 A | |
| Total Harmonic Distortion (THD) | ≤0.5% at 45 ~ 999.9Hz (resistive load) | ||
| crest factor | ≥4 | ||
| Voltage regulation rate | 0.1% (% full scale) | ||
| Load regulation rate | 0.3% (% full scale) | ||
| response time | < 100µS | ||
| setpoint | |||
| input voltage | realm | 155 Vrms / 310 Vrms | |
| resolution (of a photo) | 0.01 V at 0.00 ~ 99.99 Vrms; 0.1 V at 100.0 ~ 310.0 Vrms | ||
| accurate | ± (0.5% setpoint + 2 bits) | ||
| frequency | realm | 45 ~ 500 Hz | |
| resolution (of a photo) | 0.01 Hz at 45.00 ~ 99.99 Hz / 0.1 Hz at 100.0 ~ 500.0 Hz | ||
| accurate | ± 0.02% set point | ||
| Power on/off phase angle | realm | 0 ~ 359° | |
| resolution (of a photo) | 1° | ||
| accurate | ± 1° (45 ~ 65 Hz) | ||
| surveying | |||
| Voltage (r.m.s) | realm | 0.20 ~ 38.75 Vrms / 38.76 ~ 77.50 Vrms / 77.51 ~ 155.0 Vrms / 155.1 ~ 310.0 Vrms | |
| resolution (of a photo) | 0.01 V at 0.00 ~ 99.99 Vrms; 0.1 V at 100.0 ~ 310.0 Vrms | ||
| accurate | ± (0.51 TP3T reading + 2 bits) | ||
| frequency | realm | 45 ~ 500 Hz | |
| resolution (of a photo) | 0.01 Hz at 45.00 ~ 99.99 Hz / 0.1 Hz at 100.0 ~ 500.0 Hz | ||
| accurate | ± 0.1 Hz | ||
| Current (r.m.s) | realm | 2.00 ~ 70.00 mA / 60.0 ~ 350.0 mA / 0.300 ~ 3.500 A / 3.00 ~ 10.00 A | |
| resolution (of a photo) | 0.01 mA, 0.1 mA, 0.001 A, 0.01 A | ||
| accurate | ± (0.6% reading + 5 bits) , 2.00 ~ 350.0 mA / ± (0.5% reading + 5 bits) , 0.300 ~ 3.500 A / ± (0.5% reading + 3 bits) , 3.000 ~ 10.00 A | ||
| Current (peak) | realm | 0.0 ~ 40.0 A | |
| resolution (of a photo) | 0.1 A | ||
| accurate | ± (1% reading + 1 bit) | ||
| Power (W) | resolution (of a photo) | 0.01 W, 0.1 W, 1 W | |
| accurate | ± (0.6% reading + 5 bits) , 0.20 ~ 99.99 W; ± (0.6% reading + 5 bits) , 100.0 ~ 999.9 W; ± (0.6% reading + 2 bits) , 1000 ~ 9999 W | ||
| Apparent power (VA) | resolution (of a photo) | 0.01 VA, 0.1 VA, 1 VA | |
| accurate | ± (1% reading + 7 bits) , 0.20 ~ 99.99 VA / ± (1% reading + 7 bits) , 100.0 ~ 999.9 VA / ± (1% reading + 5 bits) , 1000 ~ 9999 VA | ||
| power factor | realm | 0.000 ~1.000 | |
| resolution (of a photo) | 0.001 | ||
| accurate | ±2% Read Value + 2 bits | ||
| routine | |||
| Remote Output Signal | Pass, Fail, Test-in Process, Trigger in, Trigger out, EXT ON/OFF | ||
| Synchronized Output Signal | Output signal 10 V, BNC type | ||
| predetermined number | 10 (0~9 numeric keys) | ||
| safeguard | OCP, OPP, OTP | ||
| Sequence/Analog/Programming Functions | |||
| memory count | 10 (0~9 numeric keys) | ||
| Number of steps | 0 ~ 255 Step (per sequence) | ||
| Step time setting range | 0.01 ~ 999.99 S | ||
| step by step | Constant, Keep, Linear Sweep | ||
| parameters | Output Range, Mode of AC, Frequency, Waveform (Sine only), On Phase, Off Phase, Step Term, Jump Count (1 ~ 9999, or infinite), jum-to, step coad, Branch 1, Branch 2, Trigger Outputs | ||
| sequence control | Start, Stop, Hold, Continue, Branch 1, Branch 2 | ||
| environmental conditions | |||
| operating temperature | 0 ~ +40 °C | ||
| Storage temperature | -10 ~ +70 °C | ||
| Operating humidity | 20 ~ 80% RH (non-condensing) | ||
| Storage humidity | Less than 80% RH (non-condensing) | ||
| PC remote control interface | |||
| standard equipment | USB Host, LAN | ||
| optional | GPIB / RS232 & USB; PLC control board for NF; PLC control board for EXTECH | ||
| Input Power | 1ψ AC 100/200 Vac ±10% (Japan); 1ψ AC 115/230 Vac ±15% (All countries except Japan) | ||
| sizes | |||
| 430(W)×89(H)×400(D) mm; about 24Kg | 430(W)×89(H)×560(D) mm; about 38Kg | ||
| Specifications adjusted without notice APS-7000GD1DH | |||
| model number | APS-7051 | APS-7101 | ||
| rating | 500VA | 1000VA | ||
| output voltage | 0 ~ 250 Vrms ,0 ~ 500 Vrms ,0 ~ 1000 Vrms | |||
| output frequency | 45.00 ~ 500.0 Hz | |||
| Maximum current (RMS) *1 | 0 ~ 250 Vrms | 2.5A | 5A | |
| 0 ~ 500 Vrms | 1.25A | 2.5A | ||
| 0 ~ 1000 Vrms | 0.63A | 1.25A | ||
| Maximum current (peak) | 0 ~ 250 Vrms | 10.0A | 20.0A | |
| 0 ~ 500 Vrms | 5.0A | 10.0A | ||
| 0 ~ 1000 Vrms | 2.5A | 5.0A | ||
| Total Harmonic Distortion (THD) | ≤0.5% at 45 ~ 500.0Hz (Resistive Load) | |||
| crest factor | ≤4 | |||
| Power conditioning ratio | 0.1% (% of full scale) | |||
| Load regulation rate | 0.3% (% of full scale) | |||
| preferences | ||||
| realm | 0 ~ 250 Vrms, 0 ~ 500 Vrms, 0 ~ 1000 Vrms, Automatic | |||
| input voltage | resolution (of a photo) | 0.01 V at 0.00 ~ 99.99 Vrms | ||
| 0.1 V at 100.0 ~ 999.9 Vrms | ||||
| accuracy | ± (0.5% of setting + 2 counts) | |||
| realm | 45 ~ 500 Hz | |||
| frequency | resolution (of a photo) | 0.01Hz at 45.00 ~ 99.99Hz | ||
| 0.1Hz at 100.0 ~ 500.0Hz | ||||
| accuracy | ± 0.02% of Setting | |||
| Measurement *2 | ||
| realm | 0.20 ~ 38.75 Vrms | |
| Voltage (RMS) | 38.76 ~ 77.50 Vrms | |
| 77.51 ~ 250.0 Vrms | ||
| 250.1 ~ 1000 Vrms | ||
| resolution (of a photo) | 0.01 V at 0.00 ~ 99.99 Vrms | |
| 0.1 V at 100.0 ~ 999.9 Vrms | ||
| Accuracy *3 | ± (0.5% of reading + 2 counts) | |
| frequency | realm | 45 ~ 500 Hz |
| resolution (of a photo) | 0.01Hz at 45.00 ~ 99.99Hz | |
| 0.1Hz at 100.0 ~ 500.0Hz | ||
| Accuracy*3 | ± 0.1Hz | |
| Current (RMS) | realm | 2.00 ~ 70.00 mA |
| 60.0 ~ 350.0 mA | ||
| 0.300 ~ 3.500 A | ||
| 3.00 ~ 5.00 A | ||
| 0.01mA | ||
| resolution (of a photo) | 0.1mA | |
| 0.001A | ||
| 0.01A | ||
| ± (0.6% of reading + 5 counts) , 2.00 ~ 350.0 mA | ||
| ± (0.5% of reading + 5 counts) , 0.350 ~ 3.500 A | ||
| Accuracy*3 | ± (0.5% of reading + 3 counts) ,3.500 ~ 5.00 A | |
| Current (peak) | resolution (of a photo) | 0.1A |
| precision | ± (1% of reading + 1 counts) | |
| Power (W) | 0.01 W | |
| resolution (of a photo) | 0.1 W | |
| 1 W | ||
| ± (0.6% of reading + 20 counts) , 0.20 ~ 99.99W | ||
| Accuracy*3 | ± (0.5% of reading + 20 counts) , 100.0 ~ 999.9W | |
| ± (0.5% of reading + 2 counts) ,1000 ~ 9999W | ||
| Apparent power (VA) | 0.01VA | |
| resolution (of a photo) | 0.1VA | |
| 1VA | ||
| ± (1% of reading + 5 counts) , 0.20~ 99.99VA | ||
| Accuracy*3 | ± (1% of reading + 5 counts) , 100.0 ~ 999.9VA | |
| ± (1% of reading + 2 counts) , 1000~ 9999VA | ||
| power factor | resolution (of a photo) | 0.001 |
| Accuracy*3 | ±2% reading + 2 counts | |
| general | |||||
| Synchronized Output Signal | Output signal 10 V, BNC Type | ||||
| Preset groups (number) | 10 (0~9 numeric keys) | ||||
| safeguard | OCP, OPP, OHP Warnings | ||||
| AC Power Input | |||||
| phase (waves) | Single-phase (1Ø) | ||||
| Input Voltage | 115/230Vac ± 15% | ||||
| Input frequency | 50/60Hz | ||||
| Maximum current | 16A/8A | 32A/16A | |||
| power factor | 0.7 Typ. | ||||
| environmental conditions | |||||
| Operating Temperature Range | 0 ~ +40 °C | ||||
| Storage temperature range | -10 ~ +70 °C | ||||
| Operating humidity range | 20 ~ 80% RH (non-condensing) | ||||
| Storage humidity range | 80% RH or less (no condensation) | ||||
| interfaces | |||||
| (an official) standard | USB Host, LAN | ||||
| optional | GPIB (APS-001) | ||||
| RS232 / USB CDC (APS-002) | |||||
| Size & Weight | |||||
| surname Kuan | 430 | 430 | |||
| Dimension(mm) | your (honorific) | 88 | 88 | ||
| dark (of color, water etc) | 400 | 560 | |||
| weights | 24Kg | 38Kg | |||
| *1 Operating voltage for maximum output current is 200Vrms / 400Vrms / 800Vrms. | ||
| *2 All valid measurements are accurate within a temperature range of 23±5°C. | ||
| *3 Under 25~250V / 50~500V / 100~1000V, sine wave, no load. |
Comes standard with accessories:
User's manual (CD_with USB driver)×1
Power cord × 1 Type II, for APS-7100 (PSE for Japan only)
Power cord × 1 Type I & II (depending on region), for APS-7050
Mains Terminal Cover Set ×1
GTL-123 Test Lead x 1
Optional accessories:
APS-001 GPIB Interface Board
APS-002 RS-232C / USB Interface Board (APS-7050, APS-7100, APS-7051, APS-7101)
APS-007 RS-232C interface card (APS-7200, APS-7300)
APS-003 Output Voltage: 0 ~ 600Vrms (APS-7050/APS-7100/APS-7200/APS-7300 optional)
APS-004 Output frequency: 45 ~ 1000Hz (APS-7050/APS-7100/APS-7200/APS-7300 optional)
GRA-423 APS-7050, APS-7051, APS-7101, APS-7100Rack Mount Kit
GRA-429 APS-7200Rack Mount Kit
GRA-430 APS-7300Rack Mount Kit
Ordering Information
APS-7050 500 VA Programmable AC Power Supply
APS-7100 1000 VA Programmable AC Power Supply
APS-7051 500 VA (1000V) Programmable AC Power Supply
APS-7101 1000 VA (1000V) Programmable AC Power Supply
