News Center

  • How do I connect two DC power supplies in series?

    To connect two DC power supplies in series, connect the positive terminal of the first power supply to the negative terminal of the second power supply to form a "daisy-chain" connection, where the series voltage is the sum of the voltages of the two power supplies. To connect two DC power supplies in series, proceed as follows: Note that the voltage of the load should be equal to or higher than the sum of the voltages of the two power supplies to prevent damage to the load or power supply. In addition, the load's rated...

  • How to build a DC power supply?

    You can build a DC power supply by converting AC to DC using an AC-DC converter or rectifier, and then using a voltage regulator to maintain a stable output voltage. The basic steps for constructing a DC power supply are as follows: Please note that constructing a power supply requires familiarity with electronic and electrical safety. It is best to consult a professional or use a pre-built kit to avoid danger. ,

  • What is ATE System Power?

    Automated Test Equipment (ATE) system power supplies are programmable power supplies designed specifically for ATE systems. Form factor is critical. ATE power supplies with higher power densities take up less rack space, reducing the factory floor space required for test equipment. The ATE power supply is a programmable power supply designed specifically for ATE systems.

  • What is a benchtop DC power supply?

    A benchtop DC power supply is a power supply that is mounted to an engineer's workbench for use. It usually has a large, legible display and user interface to allow the engineer to easily achieve full control of the power supply from the front panel. Users can also control modern benchtop power supplies through software. In addition, engineers can easily access the output terminals from the front. Variable bench power supplies are a convenient electric...

  • How does a DC power supply work?

    A DC power supply converts alternating current (AC) electricity to DC electricity either by a linear method or a switching method. Switching power supplies are more efficient, lighter in weight and smaller in form factor. Linear power supplies can achieve lower noise, but this is no longer an advantage with modern switching power supplies. ,

  • How do I use a DC power supply?

    A programmable DC power supply is connected to the device under test through wires connected to a DC power panel. Engineers can set voltage or current levels to power the device for testing. The DC power supply is a programmable DC power supply.

  • What are DC power supplies used for?

    A DC power supply provides a constant bias voltage or current to an electrical device, component, or circuit to ensure that the device under test operates as intended. ,

  • What is a variable DC power supply?

    It is a power supply where the user can vary the output voltage. YesTech variable DC power supplies allow you to change the output voltage and current to the device under test. ,

  • What is the difference between an arbitrary waveform generator and a function generator?

    The Function Generator provides a preset list of waveforms or code patterns that it can generate. In a function generator, the user can change waveform parameters such as frequency, amplitude, and offset, as well as add simple distortion. Arbitrary waveform generators are more complex and can emulate real-world signals. Arbitrary waveform generators utilize pre-stored digital data to generate these waveforms,...

Expand More

Product consultation and purchase:18218718851

I already understand