InfiniiVision HD3 Series Oscilloscopes

• Display up to 4 independent signals and control scaling individually.
• Isolate signals in seconds with area triggering - just draw a box on the screen.
• Use the Keysight Fault Hunter to characterize signals, find errors, and save them automatically.
• Perform advanced analysis using Fast Fourier Transforms, Histograms and Porter Plots.

Debugging designs with 4x resolution and 1/2 noise floor

Product quality is ensured by debugging with an oscilloscope that can see small signals beyond the noise.

• 14-bit ADC

  14-bit ADC provides four times the resolution

  The key component in achieving high vertical accuracy is the ADC. The more bits in the ADC, the higher the vertical resolution and the more accurate the signal representation.

  For example, an oscilloscope with a 12-bit ADC can encode an analog input into 4,096 unique conversion levels (2)¹²= 4,096). Each additional bit doubles the number of conversion levels. An oscilloscope with a 14-bit ADC can encode an analog input into 16,384 levels (2)¹⁴ (= 16,384), which is four times the resolution of an oscilloscope with a 12-bit ADC and 64 times the resolution of an 8-bit ADC.

  • 
• lower noise
  Capture with 50 µV_RMS Smaller signals with background noise

  All electronic equipment (including oscilloscopes) generates some degree of noise. However, the goal is to minimize noise as much as possible. A lower noise floor means that the oscilloscope has less influence on the signal, resulting in more accurate measurements.

  Keysight InfiniiVision HD3 with 50 µV at full 1 GHz bandwidth_RMS The HD3 sets a new benchmark in noise floor performance with its native noise. You can further reduce noise with bandwidth limiting and waveform averaging options on the HD3.

  
• Advanced Analytics
  Advanced Analytics

  Automate complex measurements with advanced software features:

  • Use the Fast Fourier Transform (FFT) to convert a time-domain signal to a frequency-domain signal.
  • Compare signals to predefined templates for quick pass/fail analysis via template testing.
  • Analyze the statistical distribution of jitter and noise using waveforms and measurement histograms.
  • Perform a frequency response analysis using a bode plot.
  • Isolate signals in seconds with zone triggering - just draw a box on the screen with your finger.
  • Use Fault Hunter to characterize signals, find errors, and save them automatically.

  

• 7 in 1 Instrument

• Oscilloscopes with 2 or 4 analog channels
• Mixed-signal oscilloscope with the ability to add up to 16 digital channels
• Protocol Analyzer
• Frequency Response Analyzer (baud plot)
• 100 MHz Arbitrary Waveform Generator
• 3-Digit Voltmeter
• 8-Bit Counter with Totalizer

• extend one's head (out or into)

Find compatible probes

Oscilloscope Probes Selection Guide

• Technical Support

Accelerate your design with technical support

Your oscilloscope purchase includes a 3-year warranty and 3 years of KeysightCare technical support, which provides consultation with technical experts and access to the Knowledge Center. You have priority access to personalized support on a regular basis. Inside the Knowledge Center, you can ask questions, manage service requests, and communicate with experts at YesTech.

Upgrade to KeysightCare Enhanced Edition for peace of mind and eliminate up to five years of additional budgeting. Trust in calibrated, within-tolerance instruments and accurate measurements. Available in select countries.