Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Surveyor
The Fluke Networks MicroScanner™2 Industrial Ethernet Cable Verifier performs on-off testing of RJ45, M12X, M12D, and M8D terminated cables in seconds and graphically displays the results so you can see opens, shorts, and crossed cables.
It also reports which end of the cable is faulty and the distance to the internal disconnect point of the cable. Cable failures can lead to costly production downtime, so it's important to quickly locate cable damage for replacement or repair.
Includes carrying case, duplex connector adapters, Cat6A patch cords, RJ45 male to RJ45 female patch cords, RJ45/M12X patch cords, RJ45/M12D patch cords, RJ45/M8D patch cords (for testing M12X's), and M12D, M8D termination cords.
Product Specification: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Tester
The following specifications apply at 23 °C (73 °F) unless otherwise noted.
| Environmental parameters | |
| operating temperature | 32 °F - 113 °F (0 °C - 45 °C) |
| storage temperature | -4 °F - +140 °F (-20 °C - +60 °C) |
| Operating relative humidity (% RH, non-condensing) | 90 % (50 °F - 95 °F 10 °C - 35 °C) 75 % (95 °F - 113 °F 35 °C - 45 °C) |
| Shock and vibration | Random, 2 g, 5 Hz-500 Hz (2 levels) 1 m drop test with or without wiring diagram adapter |
| safety | IEC 61010-1 3rd edition |
| height above sea level | 4000 m; storage: 12,000 m |
| EMC | IEC 61326-1 |
| General technical indicators | |
| Test connectors | Shielded 8-pin modular jack for 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs.MicroScanner2: For testing F connectors on coaxial cables. |
| power supply | Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours (normal use) Other Compatible Battery Types: 2 AA Lithium Camera Batteries, Nickel Metal Hydride Batteries, Nickel Spacer Batteries |
| Dimensions and weight (with batteries and wiring diagram adapter connected) | 3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner2: 10.6 oz (300 g) |
| monitor | Monochrome backlit LCD |
| test pattern | |
| Cable Testing | Measures length, verifies wiring diagrams, identifies Remote ID locators, and detects Ethernet ports. Results are displayed on a single screen. |
| sound frequency | Generates IntelliTone™ and conventional analog audio signals |
| PoE | MicroScanner2: Requests and detects 802.3af-compliant PoE (Power over Ethernet) devices |
| Performance indicators | |
| Types of cables tested | Twisted pair: UTP, FTP, SSTP Coaxial Cable (MicroScanner)2): 75 Ω, 50 Ω, 93 Ω |
| Length test | Measuring range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft), whichever is greater NVP uncertainty is additional. Calibration: User-settable NVP values for twisted-pair and coaxial cables (MicroScanner2). A known length of cable can be utilized to determine the actual NVP value. |
| Wiring Diagram Test | Detects single conductor faults, shorts, misconnections, split pairs, and up to seven remote adapter IDs. draws wiring diagrams to scale lengths to visualize the approximate location of faults. |
| Ethernet port detection | MicroScanner2: Detects the nominal rate of an 802.3 Ethernet port for 10 Mbps, 100 Mbps, and 1 Gbps rates. |
| tone generator | Supports audio generation and cable wiring diagramming with Fluke Networks digital IntelliTone™ probes. Produces four tones compatible with standard analog probes.SmartTone™ feature reliably identifies cables in a harness when using an IntelliTone or analog probe. |
Model: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Surveyor
MS2-100-IE
MS2-100-IE cable tester
Attached:
- MicroScanner™ 2 Industrial Ethernet Basic Kit with Carrying Case
- Duplex Connector Adapter
- Cat6A Patch Cord
- RJ45 Male to RJ45 Female Patch Cord
- RJ45/M12X Patch Cord
- RJ45/M12D Patch Cord
- RJ45/M8D Patch Cord for Testing M12X
- M12D
- M8D Termination Cable
Recommended
