Excellent channel performance
The SDG2000X features dual channels with equal performance and high signal fidelity.
- Maximum frequency 120 MHz
- Substantial output capability at high frequencies. Signal output capability of 20 V even at 20 MHz
- Low noise floor and high signal-to-noise ratio
- Substantial output capability at high frequencies. Signal output capability of 20 V even at 20 MHz
- Low noise floor and high signal-to-noise ratio


Innovative EasyPulse technology
When the DDS method outputs a square wave/pulse, if the sampling rate is not an integer multiple of the output frequency, a jitter of one sampling period will be generated. EasyPulse technology overcomes this shortcoming; it produces square wave and pulse signals with low jitter, in addition to the following advantages:
- Pulse frequency up to 25 MHz
- Rise and fall times can be set as fast as 8.4 ns respectively
- Pulse width finely adjustable down to 16.3 ns
- Duty cycle as low as 0.001%
- low jitter


TrueArb Waveform Technology
The innovative TrueArb technology is used to overcome the jitter and distortion produced by DDS technology. Because TrueArb utilizes point-by-point output technology, no waveform information is lost. The following advantages are also specified:
- 8 Mpts waveform length for finer waveform details
- 16 bit vertical resolution for higher signal fidelity
- With the standard EasyWave PC software, you can generate and output the signals you need.
- 16 bit vertical resolution for higher signal fidelity
- With the standard EasyWave PC software, you can generate and output the signals you need.


Complex signal generation capability
SDG2000X has powerful waveform generation capability. It can perform various signal modulation, waveform scanning, burst output and signal synthesis. It supports internal, external and manual trigger sources.
- Supports AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM signal modulation.
- Supports linear and logarithmic sweeping methods.
- Supports "N-cycle" and "gated" bursts.
- Supports combined output of two-channel waveforms. Noise, modulation, sweep, Burst, and arbitrary waveforms can be superimposed.
- Harmonic function can simulate the synthesis process of a signal
- Supports linear and logarithmic sweeping methods.
- Supports "N-cycle" and "gated" bursts.
- Supports combined output of two-channel waveforms. Noise, modulation, sweep, Burst, and arbitrary waveforms can be superimposed.
- Harmonic function can simulate the synthesis process of a signal

model number | Maximum Output Frequency | Maximum sampling rate | vertical resolution | Maximum arbitrary wave length | channel number | tax inclusive price |
---|---|---|---|---|---|---|
SDG2122X | 120 MHz | 1.2 GSa/s | 16 bit | 8 pts to 8 Mpts | 2 | ¥7,180 |
SDG2082X | 80 MHz | 1.2 GSa/s | 16 bit | 8 pts to 8 Mpts | 2 | ¥5,880 |
SDG2042X | 40 MHz | 1.2 GSa/s | 16 bit | 8 pts to 8 Mpts | 2 | ¥4,080 |
Specification | |||
---|---|---|---|
bandwidths | 40 MHz, 80 MHz, 120 MHz | Maximum output amplitude | ±10 V |
sampling rate | 1.2 GSa/s (4X interpolation) | demonstrate | 4.3-inch touchscreen display , 480 x 272 x RGB |
channel number | 2 | connector | Standard : USB Host, USB Device, LAN |
Arbitrary wave length | 8 pts ~ 8 Mpts | Option: GPIB (USB-GPIB Adapter) | |
square wave frequency | 1 μHz ~ 25 MHz | modulation function | AM, FM, PM, FSK, ASK, PSK, DSB-AM, PWM |
Pulse wave frequency | 1 μHz ~ 25 MHz | Built-in frequency meter | be |
vertical resolution | 16 bit |