Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
:: Bandwidth: DC to 10 MHz
:: High S/N ratio: waveform observation possible at the mA level
● Direct input to the oscilloscope's BNC terminal
● Waveforms can be observed in the memory recorder.
● Using a dedicated power supply option, power supplies other than oscilloscopes can be provided.
※Please use it on the main unit of a measuring instrument with a high input impedance of 1 MΩ or more.
Basic parameters (accuracy guaranteed for 1 year)
| bandwidth | DC ~ 10MHz (-3dB) |
|---|---|
| rising time | Below 35ns |
| static (in a signal) | 25mA rms or less maximum (bandwidth limited to 20MHz) |
| Continuous maximum input range | 150A rms (interval set according to frequency) |
| Maximum peak current | 300A peak (discontinuous) 500A peak (pulse width 30 μs or less) |
| Amplitude accuracy | ±1.0% rdg. ±1mV(DC, 45-66Hz, 30A rms or less) ±2.0% rdg.(DC, 45-66Hz, 30A rms 50A peak or less) |
| Amplitude accuracy | ±1.0% rdg. ±1mV (DC, 45 to 66 Hz, 0 to 150 A) ±2.0% rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak) |
| Output Voltage Rate | 0.1V/A ※Output section is built-in. |
| Wire under test | Φ20 mm |
| power supply | ±12V ±1V, 5.5VA max. |
| Volume and weight | 176W×69H×27D mm,500g,Sensor cable 2m (BNC terminal),Power cable 1m |
| attachment (email) | Soft case × 1, instruction manual × 1 |
