GPM-8213 is a digital power meter designed for single-phase (1P\/2W) AC power measurement. The product adopts 4\" TFT LCD display, 5-digit quantitative display, provides 19 kinds of parameters related to power measurement, integral measurement function, and highly accurate voltage\/current\/power measurement capability, front\/rear panel input terminals, various communication interfaces...etc., to assist the user to achieve clear, convenient and accurate power measurement. Measurement<\/p>\n
The GPM-8213 provides up to 19 parameters for power measurement, including Voltage (Vrms\/ V+pk\/ V-pk), Current (Irms\/ I+pk\/ I-pk), Frequency (VHz\/ IHz), Power (P\/ P+pk\/ P-pk), Crest Factor (CFV\/ CFI), Visible Power (VA), and Void Power (VAR), Power Factor (PF), Phase Angle (DEG), Total Harmonic Distortion Rate (THDV\/ THDI), and highly accurate voltage\/current\/power measurement (\u00b10.1% readings \u00b10.1% gears); and properly utilize the advantages of the TFT LCD display, in addition to a simple mode to present the same four parameters as the traditional power meter. In addition to the same four measurement parameters as the traditional power meter, the TFT LCD display can even display 8 measurement parameters (2 main measurements + 6 monitoring measurements), which not only meets the need for accuracy and easy readability in process testing, but also meets the needs of R&D, design and quality verification of a wide range of measurement applications.<\/p>\n
The GPM-8213 is designed to meet the requirements of IEC 62301\/EN 50564 standby power consumption measurements for products under test. The GPM-8213 also provides measurement support, including a test bandwidth of up to DC~6kHz, support for small currents up to 5mA (with a resolution of up to 0.1uA), a power measurement resolution of up to 1uW, a crest factor of up to 3 (with a half range of up to 6), and a total harmonic distortion rate (at least 13th order). Total harmonic distortion (at least 13th order power harmonics) can be measured. For large voltage\/current measurement applications, the PT\/CT rate function can be used with an external Potential Transformer or Current Transformer to meet the measurement requirements.<\/p>\n
In addition, in terms of data acquisition and storage, in addition to the standard RS-232C\/USB interface (virtual COM)\/LAN for programming and reading, there is also an optional GPIB interface (to be installed at the factory), which meets the habits of the majority of people who use automatic measurement systems.<\/p>\n