Search ProductsSearch Articles
A network analyzer consists of a signal source and a receiver. The receiver will detect changes in the output signal of the device (or network) and then compare it to the source signal fed into the device. To evaluate the effect of the device on current and voltage, the VNA measures the resulting amplitude and phase response. This results in transmission and reflection measurements, impedance, and s-parameters from which test engineers can characterize their device under test.
An AC power supply is responsible for providing AC power to the load. The power input can be either AC or DC. You need an AC power supply because the power from the wall outlet does not meet the specifications of the load. In order for the load to operate properly, you need to transform the AC power supply to tune the AC power from the supply to the voltage, current, and frequency required by the device. This can be done by boosting...
View Full VersionAutomated Test Equipment (ATE) system power supplies are programmable power supplies designed specifically for ATE systems. Form factor is critical. ATE power supplies with higher power densities take up less rack space, reducing the factory floor space required for test equipment. The ATE power supply is a programmable power supply designed specifically for ATE systems.
View Full VersionAlternating current is suitable for transmission and distribution of electricity over long distances through the grid system. Direct current is a one-way flow of charge and is more reliable than alternating current, but is not suitable for long-distance transmission. Most electronic devices use DC because their voltage is constant, such as devices powered by batteries. Some devices also use rectifiers to convert AC to DC. Power supplies usually have an internal...
View Full VersionA function generator is an electronic test device that generates a variety of standard waveforms for a device under test (DUT), such as sine, square, ramp, or sawtooth waveforms. In circuit design and circuit boards, testing often requires the use of controlled signals to simulate routine operations. Testing physical systems and sensors often requires stable and reliable signals that are as low as a few microvolts and may be as high as...
View Full VersionProduct consultation and purchase：18218718851
ABOUT US
Dedicated customer line:
13717737785
Business Negotiations:
18929381667
Contact Email:
fp@szwanbo.com
WeChat Customer Service:
Add Commissioner WeChat
Add Commissioner WeChat
Contact our technical support specialists
In order for us to serve you better, please leave your valuable information.
If you need to purchase a specific model, you can filter the product center to select the model and submit an inquiry, fill in the specific number of products, our account manager will immediately give you the most favorable wholesale price!
If you don't find a model you can leave a comment here and we'll do our best to find it for you!
Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Hello!sign in