Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke Networks MicroScanner™ PoE Industrial Ethernet Cable Tester
The Fluke Networks MicroScanner™ PoE Industrial Ethernet Cable Verifier performs on-off testing of RJ45, M12X, M12D, and M8D terminated cables in seconds and graphically displays the results so you can see opens, shorts, and crossed cables.
MS-POE can also quickly determine if the problem is caused by a lack of power supply or by a powered device. Cable and power failures can lead to costly production downtime, so it's important to quickly locate cable damage for replacement or repair.
Includes carrying case, duplex connector adapters, Cat6A patch cords, RJ45 male to RJ45 female patch cords, RJ45/M12X patch cords, RJ45/M12D patch cords, RJ45/M8D patch cords (for testing M12X's), and M12D, M8D termination cords.
Product Specification: Fluke Networks MicroScanner™ PoE Industrial Ethernet Cable Tester
The following specifications apply at 23 °C (73 °F) unless otherwise noted.
| Environmental parameters | |
| operating temperature | 32 °F - 113 °F (0 °C - 45 °C) |
| storage temperature | -4 °F - +140 °F (-20 °C - +60 °C) |
| Operating relative humidity (% RH, non-condensing) | 90 % (50 °F - 95 °F 10 °C - 35 °C) 75 % (95 °F - 113 °F 35 °C - 45 °C) |
| Shock and vibration | Random, 2 g, 5 Hz-500 Hz (2 levels) 1 m drop test with or without wiring diagram adapter |
| safety | IEC 61010-1 3rd edition |
| height above sea level | 4000 m; storage: 12,000 m |
| EMC | IEC 61326-1 |
| General technical indicators | |
| Test connectors | Shielded 8-pin modular jack for 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. |
| power supply | Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours (normal use) Other Compatible Battery Types: 2 AA Lithium Camera Batteries, Nickel Metal Hydride Batteries, Nickel Spacer Batteries |
| Dimensions and weight (with batteries and wiring diagram adapter connected) | 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner™ PoE: 10.6 oz (300 g) |
| monitor | Monochrome backlit LCD |
| test pattern | |
| Cable Testing | Measure length, verify wiring diagrams, identify Remote ID locators, and detect Ethernet ports. MicroScanner™ PoE also displays HIGH Ω when cable resistance exceeds 12.5 Ω. Results are displayed on a single screen. |
| sound frequency | Generates IntelliTone™ and conventional analog audio signals |
| PoE | MicroScanner™ PoE: Requests and detects the presence of 802.3af, at, bt and UPOE (Cisco Universal Power over Ethernet) compliant PoE devices |
| Performance indicators | |
| Types of cables tested | Twisted pair: UTP, FTP, SSTP |
| Length test | Measuring range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft), whichever is greater NVP uncertainty is additional. Calibration: The user can set the twisted pair NVP value. A known length of cable can be used to determine the actual NVP value. |
| Wiring Diagram Test | Detects single conductor faults, shorts, misconnections, split pairs, and up to seven remote adapter IDs. draws wiring diagrams to scale lengths to visualize the approximate location of faults. |
| Ethernet port detection | MicroScanner™ PoE: Detects the nominal rate of 802.3 Ethernet ports for 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps rates. |
| tone generator | Supports audio generation and cable wiring diagramming with Fluke Networks digital IntelliTone™ probes. Produces four tones compatible with standard analog probes.SmartTone™ feature reliably identifies cables in a harness when using an IntelliTone or analog probe. |
Model: Fluke Networks MicroScanner™ PoE Industrial Ethernet Cable Tester
MS-POE-IE
MS-POE-IE Cable Verification Tester
Attached:
- MicroScanner™ PoE Industrial Ethernet Basic Kit with Carrying Case
- Duplex Connector Adapter
- Cat6A Patch Cord
- RJ45 Male to RJ45 Female Patch Cord
- RJ45/M12X Patch Cord
- RJ45/M12D Patch Cord
- RJ45/M8D Patch Cord for Testing M12X
- M12D
- M8D Termination Cable
