ATA-1000 Series Broadband Amplifier

The ATA-1000 series is an ideal broadband amplifier that can amplify AC and DC signals. The bandwidth is up to 25MHz, and it has two input resistances of 50Ω/10kΩ (or 50Ω/1MΩ) selectable to match the signal source with high or low internal resistance to realize the amplification of signals. The output resistance is adjustable, so customers can choose flexibly according to the test requirements.

ATA-1000 series broadband amplifier application scenarios: ultrasonic atomization, non-destructive testing, diode testing, ultrasonic processing, antenna driving, focused ultrasound, electro-optical modulation.

High-speed signal response

With a maximum bandwidth of 25MHz, the ATA-1000 series guarantees high conversion rates and good step response.

short circuit protection

For the protection of abnormal phenomena in the test, such as load breakdown, positive and negative level short circuit, instrument overcurrent use, etc., this function can timely cut off the output of the instrument and alarm prompts, so as to avoid equipment damage.

Voltage monitoring, current monitoring

ATA-1000 series amplifiers are equipped with voltage and current monitoring ports, which can be directly connected to an oscilloscope to monitor the output voltage and current of the amplifier, making scientific research experiments more efficient.

quadrant output

When AC voltage is applied to capacitive or inductive loads, due to the load characteristics of the current and voltage signal phase of the existence of overrun or hysteresis, the current will be backed up from the load side, the general power supply or amplifier will not be able to drive the situation, the ATA-1000 series has a four-quadrant output characteristics, both the output current and the current can be absorbed, so that the series of products can be driven by various types of loads.