The GAG-810/809 provides a solution for the generation of low-frequency signals (<1MHz), especially audio signals. The intuitive and simple operation panel provides accurate frequency and amplitude by dial selection of different ranges. In addition to the traditional analog sine wave output a square wave output is provided for digital applications. Distortion is kept to a minimum, especially in the audible frequency range of 500Hz to 20kHz, where distortion is kept to a minimum of only 0.02% or less. An external synchronization input signal is available to aid in connectivity with other instruments.
norm | |
simple harmonic vibration | |
frequency range | 10Hz ~ 1MHz, total 5 steps |
frequency indicator | Dial Scale |
frequency accuracy | +(5% + 1Hz) |
output voltage | 5 Vrms (600Ω load) |
frequency response | 10Hz ~ 1MHz +0.5dB (600Ω load) |
Reference Frequency (1kHz) | |
Distortion factors | 500Hz ~ 20kHz, 0.02% or below (GAG-809:≤0.1%);100Hz ~ 100kHz, 0.05% or below (GAG-809:≤0.3%);(x 10 range for 100Hz, x 1k range for 100kHz);50Hz ~ 200kHz, 0.3% or less; 20Hz ~ 500kHz, 0.5% or less; 10Hz ~ 1MHz, 1.5% or less |
square wave | |
output voltage | 10Vp-p or more |
Overshoot | 2% or less (at 1kHz, max output) |
Sag. | 5% or less (at 50Hz) |
Rise/fall time | Less than 200nS |
periodicity | 50% +5% |
external synchronization | |
Synchronization range | +5% / Vrms |
Maximum Input | 15V (DC + AC peak) |
Input Impedance | 150kΩ |
exports | |
Output Impedance | 600Ω+10% |
Output Attenuator | 0, -10, -20, -30, -40, -50dB; 6 steps (accuracy +1dB at 600Ω load) |
Using the power supply | |
AC 100/120/220/230V +10%, 50/60Hz | |
attachment (email) | |
Power cord x 1, Operation manual x 1, Test lead GTL-103 x 1 | |
Size and Weight | |
130(W) x 210(H) x 292(L) mm, approx. 3Kg |
Operation manual x 1
Power cord x 1
Test Lead GTL-103 x 1
Ordering Information
GAG-810 1MHz Audio Signal Generator (Sine wave distortion: 0.02% )