Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke NORMA 5000 High Accuracy Power Analyzer
Fluke Norma Power Meters|Power Analyzers: Reliable, Highly Accurate Measurement Tools for Power Electronics Test and Development
The compact Fluke Norma series of power detection analyzers/power meters offers new measurement techniques to help engineers involved in the development and testing of motors, inverters, lighting, power supplies, transformers and automotive parts make their products more productive.
The Fluke Norma Series Power Detection Analyzers/Power Meters feature a high-bandwidth architecture that enables precision measurements of single-phase or three-phase currents and voltages, harmonic analysis, Fast Fourier Transform (FFT) analysis, and the calculation of power and other calculated values.
This power detector/power meter series includes the Fluke Norma 4000 three-phase power analyzer and the Fluke Norma 5000 six-phase power detection analyzer/power meter. These rugged, high-precision power detection analyzers/power meters offer a good price/performance ratio and are convenient and reliable for use either in the field or as benchtop instruments in the lab or on the test bench.
Applications:
- Power Detection and Analysis for Electric Motors and Inverter Drive Systems - The Power Meter accurately measures switching losses caused by inverters through exhaustive spectral analysis and dynamic torque calculations, and is capable of comprehensively evaluating torque transients and harmonics at high frequencies.
- Inverter Drive System Power Detection and Analysis - The Power Meter measures all electrical and mechanical power parameters within the same event window simultaneously, allowing the user to observe the effect of one component on another, or its effect on the entire system.
- Lighting System Power Detection and Analysis - With a bandwidth of up to 10 MHz and a high sampling rate of up to 1 MHz, the Power Meter analyzes the rectifier output signal in detail. The shunt technology enables power detection at very high frequencies. At the same time, the ability to measure input and output power provides rectifier loss calculation capability.
- Transformer Power Measurement and Analysis - The power meter measures 6-phase power synchronously, calculates the efficiency and losses of high-power transformers with high accuracy even at very low power factors, and is also able to measure the resistance of multi-phase transformer coils synchronously.
- Automotive Power Detection and Analysis - Power meters measure electrical inputs and mechanical outputs simultaneously, providing data on the efficiency and losses of individual parts as well as the entire drive system.
Product Specification: Fluke NORMA 5000 High Accuracy Power Analyzer
| General technical specifications | ||
| phase (math.) | 1 to 3 | |
| weights | Approx. 5 kg (11 lb) | |
| sizes | 150 x 237 x 315 mm | |
| 5.9 x 9.3 x 12.4 in | ||
| Built-in printer | not have | |
| monitor | Color, 5.7 in / 144 mm - 320 x 240 pixels | |
| User-selectable backlight illumination and contrast ratio | ||
| bandwidths | DC max. 3 MHz or DC max. 10 MHz, depending on input module | |
| Basic precision | 0.2%, 0.1%, or 0.03%, depending on input module | |
| sampling rate | 0.33 MHz 或 1 MHz，取决于输入模块 | |
| 电压输入范围 | 0.3 V 至 1000 V | |
| 电流输入范围（直接输入，不使用分流器） | 0.03 mA 或 20 A，取决于输入模块 | |
| 配置存储器 | 4 MB | |
| 设置存储器 | 0.5 MB | |
| 快速傅里叶变换 (FFT) | 高至 40 次谐波 | |
| RS-232/USB 接口 | 标准镜头 | |
| PI1 处理接口（8 个模拟/脉冲输入和 4 个模式输出） | 可选 | |
| IEEE 488.2/GPIB 接口 (1 MBit/s Ethernet / 10 MBit/s 或 100 MBit/s) | 可选 | |
| Fluke NormaView PC 软件（用于数据下载、分析和编写报告) | 标准镜头 | |
| Basic Functions | ||
| 快速傅里叶变换 (FFT) | 计算谐波并以图形标识。最多可同时显示 3 个谐波频谱。 | |
| 被测值：每相 U、I 和 P。 | ||
| 阶次：1 次至 40 次谐波，最大半采样频率 | ||
| 数字示波器 (DSO) | 同时显示多达 3 个测量值（采样值）。快速查看波形和失真。 | |
| 积分功能（能量） | 同时显示多达 6 个可配置数字值。开始/停止条件和正/负向选项。 | |
| 矢量显示 | 可显示 HO1 多达 6 路信号的矢量图。可方便测试仪器的正确连接，以及快速查看每路信号的相位角。 | |
| 记录器 | 显示一定时间段内的平均值，进行趋势分析。 | |
| RAM 数据存储 | 储存采样值和平均值；开始/停止条件设置。 | |
| 大约 4MB 可用于储存测量值。 | ||
| 配置 | 将分析仪设置为以所需的格式测量并显示数据。 | |
| environmental conditions | ||
| Operating Temperature Range | 5 °C 至 35 °C（41 °F 至 95 °F） | |
| 存放温度范围 | -20 °C to 50 °C (-4 °F to 122 °F) | |
| 外壳材料 | Fluke Norma 功率分析仪结构非常紧凑，并采用实心金属外壳，满足苛刻的 EMC 要求。 | |
| 气候等级 | KYG DIN 40040，最大85% 相对湿度，无凝结。 | |
| power supply | 85 V AC 至 264 V 交流，50 Hz 至 60 Hz，直流 100 至 260 V，约40 VA 带开关的欧式插头。可提供相同型号的电流接线柱。 | |
| 测量输入 | 安全插孔，4 mm，每路输入 2 个。外部分流器通过 BNC 插座连接。 | |
| 操作 | 薄膜键，带光标、功能键和指令功能。 | |
| 连接 | 三相分析仪的后面板 | |
| 测量值 | ||
无缝计算每路输入的平均值。在三相系统中，还可计算三相的总功率和平均电压和电流。在同步模式下，还计算基波 H01 的这些值。
|
||
| 频率与同步 | ||
| range (of scales or measuring equipment) | 直流和 0.2 Hz 至采样率 | |
| precision | ±0.01 % 测量值（读数） | |
|
||
| 配置存储 | ||
| 可将多达 15 组用户配置保存到永久性存储器，并随后调用。未保存的修改在关闭仪器后将被丢失。 | ||
| connector | ||
| RS232 接口，可升级固件以及与 PC 交换数据。可通过一个外部转换器连接一台打印机。 | ||
| option | IEEE 488.2/1 MBps | |
| Ethernet / 10 MBit/s 或 100 Mbit/s | ||
| 标准和安全 | ||
| Electrical Safety | EN 61010-1/ 第 2 版 1000 V CAT II（600V CAT III） | |
| 污染等级 2，安全级别 I 类 | ||
| 变压器为 EN 61558 | ||
| 附件为 EN 61010-2-031/032 | ||
| Maximum Input | 对电压输入测量范围为 1000 Veff、2 kVpeak | |
| 对电流输入测量范围为 10 Aeff、20 Apeak | ||
| test voltage | 净输入 | 外壳（保护导体）：1.5 KV AC |
| 电网连接 | 测量输入：5.4 kV AC | |
| 测量输入 | 外壳：3.3 kV AC | |
| 测量输入 | 输入：5.4 kV | |
| 电磁敏感性 | 辐射标准 | IEC 61326-1，EN 50081-1，EN 55011 B 类 |
| 抗扰性 | IEC 61326-1 / 附录 A（工业部分）、EN 50082-1 | |
电源相位
Fluke Norma 4000 功率分析仪最多可配备三个电源相位。用户可以选择适合其应用的电源相位。
每个模块化插入式电源相位包括电压和电流测量通道。每个测量通道适用于每个基本单元，但每个单元只能使用一种通道。检查标准配置。
电源相位概述
| 电源相位通道 | ||
| PP42 | precision | 0.2% (0.1% rd + 0.1% rg) |
| Current range | 20 A | |
| sampling rate | 341 kHz | |
| bandwidths | 3 MHz | |
| PP50 | precision | 0.1% (0.05% rd + 0.05% rg) |
| Current range | 10 A | |
| sampling rate | 1 MHz | |
| bandwidths | 10 MHz | |
| PP54 | precision | 0.1% (0.05% rd + 0.05% rg) |
| Current range | 10 A | |
| sampling rate | 341 kHz | |
| bandwidths | 3 MHz | |
| PP64 | precision | 0.03% (0.02% rg + 0.01% rg) |
| Current range | 10 A | |
| sampling rate | 341 kHz | |
| bandwidths | 3 MHz | |
splitter
| 平面分流器 | |
| 连续负载 (Imin) 量程 (Imax) |
0.3 A |
| 32 A | |
| 额定电流（校准点） | 32 A |
| 校准点的基本精度 [%] | ± 0.03 |
| 额定电流的基本精度 [%] | ± 0.03 |
| 额定电压降 [V] | 320 mV |
| 标称电阻 [Ohm] | 10 mΩ |
| 短时超量程 （5s 负载 15s 间隔） |
100A/ 1s-5s |
| 过载 Wmax | - |
| bandwidths | DC - 1 MHz |
| frequency range | - |
| 角度精度 [ °/kHz] | ± 0.1 |
| 频率影响 [%/kHz] | - |
| 负载影响 [%/A2] | - |
| 温度系数 [ppm/K] | ≤10 |
| 重量 (kg / lbs) | 0.62 /1.36 |
| 三轴分流器 | |||
| 连续负载 (Imin) 量程 (Imax) |
0.1 A | 1 A | 6 A |
| 30 A | 100 A | 300 A | |
| 额定电流（校准点） | 10 A | 30 A | 100 A |
| 校准点的基本精度 [%] | ± 0.03 | ± 0.03 | ± 0.1 |
| 额定电流的基本精度 [%] | ± 0.03 | ± 0.03 | ± 0.1 |
| 额定电压降 [V] | 100 mV | 30 mV | 20 mV |
| 标称电阻 [Ohm] | 10 mΩ | 1 mΩ | 0.2 mΩ |
| 短时超量程（5s 负载 15s 间隔） | 35 A | 200 A | 450 A |
| 过载 Wmax | 90 W | 200 W | 2 kW |
| bandwidths | 2 MHz | 2 MHz | 1 MHz |
| frequency range | 0 至 500 kHz | 0 至 200 kHz | 0 至 100 kHz |
| 角度精度 [ °/kHz] | ± 0.001 | ± 0.002 | ± 0.002 |
| 频率影响 [%/kHz] | ± 0.0015 | ± 0.0015 | ± 0.01 |
| 负载影响 [%/A2] | 1 x 10-6 | 1 x 10-6 | 1 x 10-6 |
| 温度系数 [ppm/K] | ≤15 | ≤15 | ≤10 |
| 重量 (kg / lbs) | 0.75 / 1.65 | 0.75 / 1.65 | 1.2 / 2.65 |
| 三轴分流器（续） | |||
| 连续负载 (Imin) 量程 (Imax) |
2 A | 18 A | 18 A |
| 450 A | 1000 A | 1500 A | |
| 额定电流（校准点） | 150 A | 300 A | 500 A |
| 校准点的基本精度 [%] | ± 0.1 | ± 0.1 | ± 0.1 |
| 额定电流的基本精度 [%] | ± 0.1 | ± 0.1 | ± 0.1 |
| 额定电压降 [V] | 75 mV | 15 mV | 30 mV |
| 标称电阻 [Ohm] | 0.5 MΩ | 0.06 MΩ | 0.06 MΩ |
| 短时超量程（5s 负载 15s 间隔） | 650 A | 1500 A | 2000 A |
| 过载 Wmax | 10 kW | 7.5 kW | 10 kW |
| bandwidths | DC - 500 MHz | DC - 500 kHz | DC - 200 kHz |
| frequency range | 0 至 100 kHz | 0 至 20 kHz | 0 至 20 kHz |
| 角度精度 [ °/kHz] | ± 0.025 | ± 0.025 | ± 0.025 |
| 频率影响 [%/kHz] | ± 0.03 | ± 0.03 | ± 0.03 |
| 负载影响 [%/A2] | 0.5 x 10-6 | 0.2 x 10-6 | 0.5 x 10-6 |
| 温度系数 [ppm/K] | ≤10 | ≤10 | ≤10 |
| 重量 (kg / lbs) | 6 / 13.2 | 5.3 / 11.7 | 6 / 13.2 |
