Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
brief introduction
ZC2516C Series Intelligent Low Resistance Testers are specially designed for testing various resistances, with touch function of 24-bit color 4.3-inch color LCD screen, refreshing interface, easy to operate; 0.05% high resistance measurement accuracy and 1uΩ small resistance resolution, which is suitable for relay contact resistance, connector plug resistance, wire resistance, printed circuit board and welding hole resistance; its ultra-high-speed test speed and through the handler interface can output three different boundary comparison results signal, which is convenient for automated operation on the production line. Its ultra-high test speed and through the handler interface can output three different boundaries of the comparison results of the signal, easy to automate the operation of the production line.
Performance Characteristics
- Chinese and English operation interface
- High sampling speed approx. 20ms
- High resistance accuracy: 0.05%, small resolution: 1uΩ.
- Temperature basic accuracy:0.2°C
- Combination of R, LPR, T and other test functions
- Low voltage mode testing for effective protection of the DUT
- Temperature conversion function (△t ), temperature compensation function (TC)
- Out-of-range voltage compensation function (OVC )
- User self-calibration function (0 ADJ)
- Statistical functions, providing statistics such as Cpk, Cp, etc.
- Screenshot function, data logging function
- Simultaneous output of 10-step comparison results (over limit, pass and audible)
- Automatic upgrading of instrument operating software via USB HOST
- LXI Class C compliant
- The HANDLER interface is used to implement online operations.
- Supports MODBUS protocol
Technical indicators
| Product Model | ZC2516C | |||||||||
| monitor (computer) | 24-bit 4.3-inch color LCD with touch function | |||||||||
| readout digit | 4 ½ bits | |||||||||
| Resistance Measurement Range | 1uΩ～2MΩ | |||||||||
| Resistance range | 20mΩ |
200mΩ |
2Ω |
20Ω |
200Ω |
2kΩ |
20kΩ |
200kΩ |
2MΩ |
|
| amps | 1A |
1A |
100mA |
10mA |
1mA |
100uA |
10uA |
1uA |
||
| Basic accuracy of measurement | 0.1% | 0.05% |
0.2% |
|||||||
| Resistance Measurement Time | FAST: 10ms; MED: 25ms; SLOW1: 115ms; SLOW2: 455ms | |||||||||
| Temperature measurement time | 100±10ms | |||||||||
| Test Side Configuration | four-terminal | |||||||||
| Low Voltage Measurement | Open circuit voltage: ≤ 40mV, valid range: 2Ω, 20Ω, 200Ω, 2kΩ | |||||||||
| thermoelectric potential elimination | √ | |||||||||
| statistical function | Mean, large value, small value, total standard deviation, sampling standard deviation, engineering capability index (dispersion Cp, bias CpK) | |||||||||
| Measurement setup parameter saving | 30 groups | |||||||||
|
temperature measurement |
Sensor: PT500 -10.0℃-99.9℃ | |||||||||
| Analog input: 0V-2V | ||||||||||
| Display: -99.9℃-999.9℃ | ||||||||||
| Other Functions | Temperature compensation function, temperature conversion function | |||||||||
|
comparator |
signal output | HI/IN/LO | ||||||||
| rapid response | Chirp mode: OFF, IN, HI/LO | |||||||||
| Limit setting method | 3 steps, value upper/lower limit, percentage upper/lower limit + nominal value | |||||||||
| Interface Configuration | USB DEVICE, USB HOST, RS232C, HANDLER | |||||||||
