Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
■ Suitable for most applications
The new DAS30 / 50 / 60 series data loggers are designed to meet the requirements of most industrial applications (IEC standard 61010, Class III measurement standard 600V). You can view your test data directly from memory or store it directly to USB. With the Sefram software you can easily import the data into your PC.
■ Universal input
The new DAS30/50/60 data loggers offer universal input connectors for all signal sources:
- Voltage range from 1mV to 1000V DC or 425Vrms
- Temperature (thermocouple) and Pt100/Pt1000*
- Counting, Frequency
- Current (shunt optional)
■ simple and easy to use
A new user interface with an oversized touch screen makes this portable DAS data logger easy to use with many data logging software and allows for easy data transfer.
■ Options
- 110 mm Thermal Printer Module: You can install a thermal printer module (110 mm wide, 10 m long thermal paper roll) on the Sefram DAS30/50/60.Pt100/Pt1000
- Pt100/Pt1000 Board: This board comes standard with the DAS60 and is optional for the DAS30/50. It adds two channels with 2-, 3- or 4-wire setups and is dedicated to Pt100/Pt1000 platinum resistance measurements. Using a 20-bit analog-to-digital conversion interface, this board provides temperature test data with very high accuracy and resolution.
| Specifications - Universal Input | |
| Number of Channels : | 2 (DAS30), 4 (DAS50), 6 (DAS60) |
| input voltage | |
| Bandwidth. | 100 kHz |
| DC Voltage Range . | 1 mV - 1000 V |
| Maximum Input Voltage : 0.5V | ± 500 VDC or 440 VAC |
| Maximum Compensation. | ± 5 ranges (max. ± 500 V) |
| Accuracy . | ± 0,1% of range ; ± 10µV / ± 0,1% Compensation |
| True RMS (TRMS) AC+DC Range. | 200 mV - 424 V |
| Bandwidth (- 3 dB). | 5 Hz - 500 Hz |
| Response time . | 100 ms standard (40 ms - 50 Hz) |
| Crest Factor. | 2.2 & 600 V peak voltage |
| frequency | |
| Sensitivity : | 100 mV rms min. |
| Work Cycle : | 10% min. |
| Frequency range . | 0.1 Hz - 100 kHz |
| Basic precision | 0.02% Full Scale |
| temp | |
| transducers | realm |
| Couple J | -210°C - 1200°C |
| Couple K | -250°C - 1370°C |
| Couple T | -200°C - 400°C |
| Couple S | -50°C - 1760°C |
| Couple B | 200°C - 1820°C |
| Couple E | -250°C - 1000°C |
| Couple N | -250°C - 1300°C |
| Couple C | 0°C - 2320°C |
| Couple L | -200°C - 900°C |
| Energy analysis function | |
| Networking: | Single Phase, 2 Phase, 3 Phase |
| demonstrate | Fresnel Plot, Oscilloscope, Data |
| surveying | Average, RMS, Peak, Peak factor, THD and DF of voltage and current, active power, reactive power, apparent power, power factor (cos ϕ) |
| harmonic (wave with frequency an integer multiple of the fundamental) | Calculation of the 50th harmonic |
| sampling | |
| Resolution: | 14bit |
| Sampling speed | Up to 1M/s per channel |
| Storage Length | 32M words per paragraph, up to 128 paragraphs |
| trig | Positive Edge, Negative Edge, Logic Input, Delay, Go No Go |
| bandwidths | |
| Bandwidth (-3dB)) | |
| realm | >1V: 100kHz |
| realm | >50mV: 50kHz |
| realm | 5mV: 20kHz |
| Built-in analog filter | 10kHz,1kHz,100Hz,10Hz |
| slope | 40dB per cell |
| Programmable Digital Filters | 10kHz,1Hz,0.1Hz,0.01Hz,0.001Hz |
| slope | 20MΩ
≥1V: >1MΩ |
| Maximum Input Voltage | ± 500VAC between one channel and ground |
| Single channel between two terminals | ± 500VAC |
| Channel isolated from ground | |
| logical input | |
| Passage: | 16 |
| TTL - Maximum Voltage | 24V |
| Sampling speed | Same sampling speed as analog inputs |
| Sensor power supply | 9-15V |
| Alarm 2 | A&B 0-5V Output |
| PT100/PT1000* Input (DAS30/50 factory option) | |
| Number of channels: | 2 |
| amps | Pt100: 1mA, Pt1000: 100μA |
| resolution (of a photo) | Same sampling speed as analog inputs |
| Sensor power supply | 20bit |
| temperature range | -200°C - +850°C |
| surveying | 2-wire, 3-wire, 4-wire |
| Accuracy at 20°C | ±0.2°C |
| Printing paper indicators((Factory option for all models) | |
| Paper width. | 110mm |
| Paper Speed : | 1mm/min - 25mm/s |
| Memory Mode Paper Speed: | Up to 10 mm/s |
| Resolution and Accuracy : Y-axis : 1.5mm | 8 points /mm |
| X-axis : | 16 points/mm |
| XY Mode . | 8 points/mm (x and y axes) |
| stockpile | |
| Setting up backups : | Unlimited on hard disk |
| Built-in hard disk : | DAS30/50 for 32GB SSD, DAS60 for 64GB |
| General specifications | |
| Shows : | 10" TFT LCD color touch screen
F(t) and XY functions Zoom, Cursor, dV, dT, Inter-cursor zoom Calculation function. y=ax+b, y=/x/+b, y=a√x+b+c, y=ax2+b, y=(log x)+b, yae(x+b)+c |
| Automatic Measurement . | 20 automatic measurement parameters ( F, T, Vpp, Tm...) |
| Interface. | 2 USB ports, Ethernet port |
| Power supply. | 100 to 240 VAC, maximum output 15 V 5A. |
| Battery : | Li-ion 10.8 V, 6,5 Ah. |
| Battery Life . | Range of 9.5h when fully charged
4 hours without screensaver |
| Charge time: | 1 hour (with logger off), 4 hours to full capacity |
| Size & Weight: | 295*210*105mm,2.5kg |
| Operating temperature range: | 0°C - 40°C |
| maximum humidity | 80% non-condensing |
| Warranty: | 2 years |
| surety | IEC61010 - CAT III 600V |
| Selection Guide | DAS30 | DAS50 | DAS60 |
| 2 independent universal channels | - | ||
| 4 independent universal channels | - | ||
| 6 independent universal channels | - | ||
| random access memory (RAM) | 32GB | 32GB | 64GB |
| 2 Pt100/Pt1000 inputs | Factory option | Factory option | - |
| 110mm thermal printer | Factory option | Factory option | Factory option |
| Optional accessories | ||
| Fixture Accessories
|
SP 201 - 200 AAC, 10mV/1A, ø 15 mm.
SP 221 - 100 AAC, 100mV/1A, ø 15 mm. SP 230 - 1200 AAC, 10mV/1A, ø 50 mm. SP 261 - 1200 AAC+DC, 1mV/1A, ø 50 mm. SP 270 - 2000 AAC, 1 mV/1A, ø 70 mm. A 1287 - 3000 AAC, 0.333 mV/A, ø 150 mm / Flex |
|
| splitter | Splitter (with banana head)
|
910007100 Shunt CA 0.01 ohm : 3 A
910007200 Shunt CA 0.1 ohm : 1 A 989007000 Shunt CA 50 ohm : 0.05 A 989006000 Shunt CC 1 ohm : 0.5 A 912008000 Shunt CA 10 ohm : 0.15 A |
| Splitter (Wiring)
|
207030301 Shunt 0.01 ohm : 30 A max
207030500 Shunt 0.001 ohm : 50 A max |
|
| logical channel | 984405500 16 Insulated Logic Channel Interface
902407000 16 channel logic probe. |
|
| .
suitcase
|
903001000 DAS30/50 Carrying Case
906002000 DAS60 suitcase |
|
| FLEXPRO Software
|
916002100 FlexPro View
916002200 FlexPro Standard 916002300 FlexPro Professional 916002400 FlexPro Developer Suite |
|
| Printer module (ICBC option)
|
903002000 Thermal printer module for DAS30/50
906003000 Thermal printer module for DAS60 |
|
| disposables
|
837500526 Thermal paper roll (10m)
Pt100/Pt1000 (DAS30 / 50 factory option) 903003000 2 channels Pt100/Pt1000 |
|
| 19" Mounting Kit
|
903004000 DAS30/50 tool kit
906001000 DAS60 Tool Kit
|
|
| Accessories : A carrying case, a set of red and black cables + alligator clips + quick banana plug, adapter, manual instructions (CD-ROM). | ||
■ 2 analog channels, 16 logic channels
■ Maximum 1μs sampling speed per channel
■ 100kHz bandwidth
■ 32GB internal hard drive
■ 32M memory
■ Universal input
■ DC, AC+DC RMS voltage testing
■ Frequency, counting
■ Temperature: Thermocouple, Pt100/Pt1000 (optional)
■ Power analysis function (up to 400 Hz, model DAS60)
■ 14-bit resolution
■ 10" TFT panoramic LCD touch screen
■ Interfaces: 2 x USB, Ethernet
■ Lithium-ion battery with up to 9.5 hours of battery life
■ 110mm thermal printer module (optional)
■ IEC standard 1010 Type III measurement standard 600 V
■ Factory Options: Printer Module (all models) -Pt100/
Pt1000 (DAS30/50)
■ Repair/troubleshooting of electronic systems
■ Voltage, current and temperature recording and monitoring
■ Power analysis of single-phase motors and three-phase systems
