Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
:: For short-time measurements in locations where there are no temperature variations
● Confirmation of measured values on site by means of a display unit
● Four types of outputs can be made to a memory recorder or data acquisition instrument depending on the application (used with a display unit) Waveform output, RMS output, peak output, and frequency output.
※AC/DC电流传感器CT7700系列仅有单机是无法使用的。请在连接至存储记录仪/数据采集仪等时与显示器单元CM7290配套使用。
Basic parameters (accuracy guaranteed for 3 years, adjusted accuracy guaranteed for 3 years)
| Rated measuring current | AC/DC 100 A |
|---|---|
| Maximum Input Current | 100 A (with frequency derating) |
| maximum peak value | 150 A peak |
| frequency bandwidth | DC~5 kHz (-3dB) |
| Phase Representation Accuracy | ±1.8 deg. (DC < f ≤ 66 Hz) |
| output rate | 1mV/A |
| Maximum rated voltage to ground | AC/DC 600 V (CAT IV) |
| Measurable conductor diameter | φ 33 mm or less |
| output connector | HIOKI PL14 |
| Temperature range | -25℃~65℃ |
| Dust and water resistance* | IP40 (钳口关闭时) |
| Volume and weight | 58W × 132H × 18D mm, 250 g, cord length 2.5 m |
| attachment (email) | not have |
*Waterproofing enables measurements to be performed, but the risk of electric shock increases when measuring electrically charged parts when the unit is wet.
Recommended
