Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
:: Wide bandwidth: DC~120MHz
:: High S/N ratio: waveforms of 1mA or more can be observed
● Direct input to the oscilloscope's BNC terminal
● Waveforms can be observed using a memory recorder.
● Power can be supplied from outside the oscilloscope using the dedicated power supply included in the option.
When the oscilloscope/storage recorder cannot be powered, the optional power supply 3269 or 3272 is required.
※Please use it on the main unit of a measuring instrument with a high input impedance of 1 MΩ or more.
※Please use it on the main unit of a measuring instrument with a high input impedance of 1 MΩ or more.
Basic parameters
| bandwidth | DC ~ 120 MHz (-3dB) |
|---|---|
| rising time | Below 2.9 ns |
| disruptions | 60 μA rms typical, 75 μA rms max. (for tester with 30 MHz bandwidth) |
| Maximum rated current | 5 A rms (derating determined by setting frequency) |
| Maximum peak current | ±7.5 A peak (discontinuous) |
| Amplitude accuracy | ±1.0% rdg. typical ±1mV ,±3.0% rdg. ±1mV (DC, 45 to 66Hz, 0 to 5 A rms) |
| Output Voltage Rate | 1V/A* The output of this instrument is terminated internally. |
| Measurable conductor diameter | φ 5 mm or less |
| power supply | ±12V ±0.5 V, 3.2 VA (at continuous maximum input) |
| Volume and weight | Sensor section: 155W × 18H × 26D mm, End section: 29W × 83H × 40D mm, 250 g, Sensor cable length 1.5 m (BNC terminal), Power cord length 1 m (power plug: made by LEMO / FFA.0S.304.CLAC37Y) |
| attachment (email) | Instruction manual ×1, Carrying case ×1 |
Recommended
