Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
AFG-100/200 series is a compact and lightweight arbitrary waveform signal source module with DC power supply. It can be seamlessly connected with GDS-2000A series digital oscilloscope and perfectly embedded in GDS-2000A oscilloscope chassis, so that the combination of oscilloscope, logic analyzer, signal source, and power supply can greatly save the space of the laboratory table. The AFG-225P is the most compact oscilloscope in the world. The AFG-225P is a dual-channel oscilloscope with 25MHz frequency bandwidth (Sine/Square), 1uHz resolution, and built-in Sine, Square, Pulse, Triangle, and Noise waveforms. For the arbitrary waveform function, both channels provide 120MSa/s sampling rate, 10-bit resolution, 4k record length, and 66 built-in arbitrary waveforms for user selection. In addition, the AFG-225P provides AM/ FM/ PM/ FSK/ SUM/ Bust modulation and sweep functions for various communication applications.
The two channels of the AFG-225P can be configured independently or in association. The AFG-225P provides three types of operations: coupling, tracking, and phase. The AFG-225P also provides 2.5V/3.3V/5V and 0.6A power supply outputs for simple power supply requirements, bringing more convenience to users.
The main features of AFG-100/200 series are output amplitude of 2.5Vpp (connected to 50 ohm load), frequency range up to 25MHz, frequency resolution of 1uHz; built-in sine wave, square wave, triangle wave and noise signal. The square wave can be adjusted from 1% to 99% duty cycle and can be used as a pulse signal. Users can select the built-in 66 kinds of waveforms for arbitrary editing through the FG-APP program of GDS-2000A. AFG-100/200 series can support AM/PM/FSK/SUM modulation, frequency scanning, Burst and coupling functions, which are suitable for various communication fields.
Quick Selection
| model number | frequency range | sampling rate | resolution (of a photo) | Waveform length | channel number |
| AFG-125 | 1uHz-25MHz | 120MSa/s | 10bits | 4K | 1 |
| AFG-125P | 1uHz-25MHz | 120MSa/s | 10bits | 4K | 1 |
| AFG-225 | 1uHz-25MHz | 120MSa/s | 10bits | 4K | 2 |
| AFG-225P | 1uHz-25MHz | 120MSa/s | 10bits | 4K | 2 |
| Detailed specifications | |||
| AFG-125 / AFG-125P | AFG-225 / AFG-225P | ||
| output channel | 1 | 2 | |
| waveform | Sine, Square, Ramp, Pulse, Noise, Arbitrary Waves | ||
| Arbitrary Functions | |||
| sampling rate | 120 MSa/s | ||
| repetition rate | 60MHz | ||
| Waveform length | 4k point | ||
| Amplitude resolution | 10 bits | ||
| non-volatile memory | 4k point | ||
| frequency characteristic | |||
| gear level (i.e. first gear, high gear etc) | Sine/Square Wave | 1uHz~25MHz | |
| oblique wave | 1uHz~1MHz | ||
| resolution (of a photo) | 1uHz | ||
| accurate | stability | ±20 ppm | |
| aging rate | ±1 ppm, per year | ||
| tolerance (allowed error) | ≤1 mHz | ||
| Output Characteristics | |||
| amplification | gear level (i.e. first gear, high gear etc) | GPA-501 Power supply: 1mVpp to 2.5Vpp (into 50Ω), 2mVpp to 5Vpp (open); USB power supply: 1mVpp to 2Vpp (into 50Ω), 2mVpp to 4Vpp (open) | |
| accurate | Set value ±2% ±1 mVpp (at 1 kHz) | ||
| resolution (of a photo) | 1mV or 3 bits | ||
| flatness | ±1% (0.1dB) ≤100kHz, ±3% (0.3 dB) ≤5MHz, ±5% (0.4 dB) ≤12MHz, ±10% (0.9dB) ≤25MHz (sinusoidal vs. 1kHz) | ||
| unit (of measure) | Vpp, Vrms, dBm | ||
| misalignment | |||
| gear level (i.e. first gear, high gear etc) | GPA-501 Power: ±1.25 Vpk ac +dc (into 50Ω), ±2.5Vpk ac +dc (open); USB power: ±1 Vpk ac +dc (into 50Ω), ±2 Vpk ac +dc (open) | ||
| accurate | Setting value of 2% + 10mV + amplitude of 0.5% | ||
| waveform output | |||
| (electrical) impedance | 50Ω typical (fixed), > 10MΩ (output disabled) | ||
| safeguard | Short circuit protection. Overload relay automatically disables the main output | ||
| Sine wave characteristics | |||
| harmonic distortion | ≤-50 dBc DC ~ 1MHz, Ampl > 1Vpp; ≤-35 dBc 1MHz ~ 5MHz, Ampl > 1Vpp; ≤-30 dBc 5MHz ~ 25MHz, Ampl > 1Vpp | ||
| Square wave signature | |||
| Rise/fall time | Maximum output ≤ 10ns. (into 50 Ω load) | ||
| drastic | <2% | ||
| unsymmetrical | Cycle of 1% +5 ns | ||
| Variable duty cycle | 1.0% ~ 99.0% ≤ 100kHz; 10% ~ 90% ≤ 1MHz; 50% ≤ 25MHz | ||
| Slant wave characteristics | |||
| linearity | < 0.1% of peak output | ||
| variable symmetry | 0% to 100% (0.1% resolution) | ||
| Pulse Wave Characteristics | |||
| cyclicality | 40ns~2000s | ||
| pulse width | 20ns~1999.9s | ||
| drastic | <2% | ||
| accurate | 0.1%+20ns | ||
| judder | 20ppm +10ns | ||
| AM modulation | |||
| carrier waveform | Sine, Square, Ramp, Pulse, Arbitrary Waveforms | ||
| Modulated Waveforms | Sine, Square, Triangle, Upramp, Dnramp | ||
| modulation frequency | 2mHz to 20kHz | ||
| (of a speech etc) profundity | 0% ~ 120.0% | ||
| source (of information etc) | inside (part, section) | ||
| FM modulation | |||
| carrier waveform | Sine, Square, Ramp | ||
| Modulated Waveforms | Sine, Square, Triangle, Upramp, Dnramp | ||
| modulation frequency | 2mHz to 20kHz | ||
| peak deviation | DC ~ Maximum Frequency | ||
| source (of information etc) | inside (part, section) | ||
| SWEEP | |||
| waveform | Sine, Square, Ramp | ||
| typology | Linear or logarithmic | ||
| Start/stop frequency | 1uHz to maximum frequency | ||
| scanning time | 1ms ~ 500s | ||
| source (of information etc) | Internal / Manual | ||
| FSK | |||
| carrier waveform | Sine, Square, Ramp, Pulse | ||
| Modulated Waveforms | 50% Square Wave Duty Cycle | ||
| modulation ratio | 2mHz to 100 kHz | ||
| frequency range | 1uHz to maximum frequency | ||
| source (of information etc) | inside (part, section) | ||
| PM | |||
| carrier waveform | Sine, Square, Ramp | ||
| Modulated Waveforms | Sine, Square, Triangle, Upramp, Dnramp | ||
| modulation ratio | 2mHz to 20kHz | ||
| phase deviation | 0˚ to 360˚ | ||
| source (of information etc) | inside (part, section) | ||
| SUM | |||
| carrier waveform | Sine, Square, Ramp, Pulse, Noise | ||
| Modulated Waveforms | Sine, Square, Triangle, Upramp, Dnramp | ||
| modulation ratio | 2mHz to 20kHz | ||
| SUM Depth | 0% ~ 100.0% | ||
| source (of information etc) | inside (part, section) | ||
| SYNC Output | |||
| typology | Synchronized, scanning markers, burst markers or arbitrary waveform markers | ||
| quasi-judicial | TTL compatible 50Ω | ||
| allocate | Channel 1 or Channel 2 | ||
| polarities | Normal or inverted | ||
| Fan-Output | ≥4 TTL Load | ||
| (electrical) impedance | 50Ω Typical | ||
| dual-channel function | |||
| phase (waves) | '-180˚ ~180˚ (square wave and pulse wave are constant, phase is 0°) Synchronized phase | ||
| haunt | CH2=CH1 or CH1=CH2 | ||
| be coupled (with sth) | Frequency (Proportional or Differential) Amplitude & DC Offset | ||
| BURST | |||
| waveform | Sine, Square, Ramp, Arbitrary Waves | ||
| frequency | 1uHz~15 MHz (Sine); 1uHz~15 MHz (Square); 1uHz~1 MHz (Ramp) | ||
| Burst Count | 1 to 65535 Cyclic or Infinite | ||
| Start/stop phase | -360 ～ +360 | ||
| internal cycle | 1ms ~ 500s | ||
| Gate Source | external trigger | ||
| trigger source | Single or internal rates | ||
| Trigger delay N-cycle, infinite | 0s ～ 655350ns | ||
| (sth. or sb) else | |||
| Save/Recall | 10 sets of setting memory | ||
| power output (of an electrical device etc) | Only AFG-125P/AFG-225P: Output voltage : (2.5V/3.3V/5V)±5%, Output current : 0.6A | ||
| connector | USB (device) | ||
| power supply | DC 5V | ||
| power wastage | 10 W (max) | ||
| operating environment | Temperature to specification : 18 ~ 28˚C, Operating temperature : 0 ~ 40˚C, Relative humidity : < 80%, 0 ~ 40˚C, Installation category : CAT II | ||
| Running height | 2000 Meters | ||
| Storage temperature | -10~70˚C, Humidity: ≤70% | ||
| Dimensions (WxHxD) | 215(W) x 35 (H) x 107(D) mm | ||
| weights | Approx. 1kg | ||
Standard Accessories
GTL-101 BNC-Crocodile Clip Test Lead *1 (AFG-125/125P limited)
GTL-101 BNC-Crocodile Clip Test Leads*2 (AFG-225/225P Limited)
GTL-105A test line*1 (AFG-125P/225P limited)
Quick Manual*1, CD-ROM AFG Software and User's Manual*1
Optional Accessories
DS2-FH1 Module Expansion Bracket & USB Type A to A/B Cable
GPA-501 Transformer
GPA-502 International Transformer
GTL-246 USB Type A to Type B Cable
GTL-201A Ground lead
