Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
High voltage single ended probes are typically used to measure signals below 40 kV ground referenced. However, some single-ended probes are designed for use in instruments with isolated or floating inputs for non-ground-referenced measurements. The user should select a probe with a low input capacitance specification (< 4 pF) to minimize the effect of probe loading on the circuit, as probes with lower input capacitance provide higher input impedance at higher frequencies.
Tektronix High Voltage Probe Solutions offers:
- Bandwidth up to 800 MHz
- Probe loading effects with an input capacitance of only 1.8 pF
- Products that meet third-party safety approvals (UL, CSA, ETL)
- Comprehensive range of probe accessories
| model number | bandwidths | Input Impedance | Maximum voltage | quote | Configurations and offers |
| P5122
View compatible instruments |
200 MHz | 100 MΩ || 4 pF | RMS: 1000 V Cat II | US $630 | Configurations and offers |
| P5150
View compatible instruments |
500 MHz | 40 MΩ || 3.8 pF | Peak: 2.5 kV RMS: 1000 V CAT II |
US $1,050 | Configurations and offers |
| P5100A
View compatible instruments |
500 MHz | 40 MΩ || 2.5 pF | Peak: 2.5 kV RMS: 1000 V CAT II |
US $1,090 | Configurations and offers |
| TPP0850
View compatible instruments |
800 MHz | 40 MΩ || 1.8 pF | Peak: 2.5 kV RMS: 1000 V CAT II |
US $1,710 | Configurations and offers |
| P6015A
View compatible instruments |
75 MHz | 100 MΩ || 3 pF | 20 kV | US $4,780 | Configurations and offers |
