PWX Series Low Profile Wide Range Variable Switching DC Power Supplies

LAN × VMCB (Virtual Multi-Channel Bus) function is standard to support network-based remote control and monitoring.

The PWX series comes standard with LAN, USB, and RS232C as communication interfaces. In addition, the VMCB (Virtual Multi-Channel Bus) function, which allows multiple PWX series to be managed in a virtual workgroup, can be used at the same time.^※2In addition to 1 to N, the PWX system can efficiently perform not only 1 to N, but also N to M and large-scale network-type remote control and monitoring. In particular, LAN can be used for LXI (LAN eXtention for Instrumentation) to control and monitor power supplies by accessing a web server embedded in the PWX system using a web browser on a personal computer, smartphone, or tablet PC. In addition, by using the SD013-PWX (Wavy for PWX), an alternative timing creation software, it is possible not only to designate channels (individually) to set up the PWX series connected to the VMCB, but also to perform batch control using the global command.^※3. Simultaneous output ON/OFF switching of multiple devices, as well as output voltage and current value operations are possible.

※2: Regarding PWX750ML, it is planned to enable this function in firmware version Ver.2.0 or above.
※3: Valid only for direct control of Wavy for PWX. The global command is also available for VXI-11/HiSl IP/SCPI-RAW control.

Example of a basic structure consisting of a LAN interface and a VMCB

Connect the PC and PWX series to the LAN using a hub, and set up the PWX series for which the hypothetical workgroup is set up as shown in the figure below. Also, set the number of hypothetical workgroups Max to 255, and the Max number of units per workgroup is 31, and the models within the workgroups do not need to be uniform.

Additional communication monitoring function

Configured to monitor communication. For example, when the LAN cable is disconnected and the controlled device is not recognized within a set period of time, a communication alarm occurs (the alarm lamp lights up), at which time the output of the device automatically stops. This prevents mis-work without monitoring and improves the trustworthiness of the system.

※Corresponds to models with a console version of Version.2.2 or higher.

About security on LAN connections

For the embedded WEB server, access restriction can be set by setting a password. Also, for control using VXI-11/HiSLIP/SCPI-RAW, host access restriction by IP address can be set. Access can be prevented from terminals from unregistered (Max. 4 can be registered) hosts.

LAN communication interface

The control via LAN communication interface is characterized by the ability to control several devices quickly, and the theoretical number of maxes that can be controlled is about 4.2 billion. (Max communication speed varies depending on the number of connected devices.) In addition, it is one of the features that enables the mixing of controllers (controllers) and controlled parties as a standard, so that it can be used for a variety of purposes. In addition, a computer system using Apple Bonjour can be accessed by using a host name instead of an IP address.

USB communication interface

Automatic identification by the Plug & Play system frees the user from the complex setting operations previously associated with digital control, and can be said to be suitable for 1:1 control. The standard number of Max connected devices is 127. In addition, the PWX series realizes a communication speed of 12Mbps (Full Speed) in accordance with the USB 2.0 standard.

RS232C communication interface

The PWX series is also equipped with an RS232C interface. It can be used for communication with personal computers, programmable devices, etc. The interface shape is RJ45, so please purchase the D-sub 9P-RJ45 conversion cable (RD-8P/9P) separately for use.

Constant power type with a 3x ratio in the operating field, and a function of an abundant test power supply.

Constant power type with 3x ratio

The field of operation is the 3x ratio constant power type that can be combined with a wide range of voltage and current settings. For example, the rated output power of 1500W, ML (PWX1500MLF) model can be operated without gap from 80V-18.75A to 26.8V-56A.

analog interface

The PWX series is equipped with interfaces necessary for control and monitoring of external signals for test power supply unit simulation, such as external voltage and resistance control. External signal input and status signal output can be performed using the rear panel J1 connector.

Output voltage, output current control

Controlled using external voltage

Applying a voltage externally to the PWX series allows you to control the output voltage and output current.

Control using external resistors

Adjusting the external resistor can control the output voltage and output current.

Output ON/OFF control using external contacts

The PWX series outputs can be controlled ON/OFF from an external contact.

Control of output shutdown using an external contact

Output deadening can be controlled from an external contact.

Clearing an alarm using an external contact (OVP2, OHP2, SD not included)

The PWX series can be alarm canceled from an external contact.

Monitoring of Motion Patterns

Output voltage and output current are monitored externally.

Internal Resistance Variable Function

In the constant voltage operation state, the output voltage drops with the set resistance value according to the corresponding output current value. The internal resistance of secondary batteries, solar cells, fuel cells, etc. can be easily simulated. In addition, the resistance value can be set via the configuration settings of the unit and the communication interface (LAN/USB/RS232C).