PWR-01 Series Compact Wide Range DC Power Supplies

timing function

The timing function enables automatic execution of pre-set contents (programs) one by one. The timing program cannot be set from the panel, but needs to be set by command. If the timing program is executed by remote control, the program can be written to the product and executed from the panel. Once a program is written to the product, it can be executed even without a PC.

Communication interfaces are standard

The PWR-01 series comes standard with the communication interfaces LAN (LXI), USB, and RS232C required to build the system, and when RS232C is used, the optional D-sub 9P-RJ45 conversion cable (RD-8P/9P) is purchased separately. J1/J2 connectors for analog control are also provided.

Safe and easy to operate front panel output terminals

The PWR-01 series comes standard with front panel output terminals (up to 10A) for benchtop use. Use safety plugs to connect the output terminals.

※The specifications of this product are defined by the output terminals on the rear panel.

synchronous operation

Synchronized operation is a function that allows setting and sequence programs to be turned on again by a trigger signal.Various models of the PWR-01 series (e.g., 400W model and 800W model, etc.) can be mixed and connected. Synchronized operation is possible even with parallel operation. For synchronized operation, various settings are made by remote control using commands. After setting, synchronized operation is possible even without a PC.

External analog control function

The PWR-01 series is equipped with interfaces necessary for analog external signal control and monitoring of test power supply units, such as external voltage and resistance control. External signal input and status signal output can be performed using the rear panel J1/J2 connectors.
When using J1/J2, purchase the optional J1/J2 connector plug kit (OP01-PWR-01) separately.

3 to 4 times ratio power type action (operating range)

A combination of voltage and current settings with a wide operating range enables power supplies with a ratio of 3 to 4 times.
For example, the PWR1201ML, rated at 1200W model output power, allows seamless operation from 80V-15A to 20V-60A.

Internal Resistance Variable Function

It is a function that decreases the output voltage with the set resistance value according to the corresponding output current value in the constant voltage operation state. The internal resistance of secondary batteries, solar cells, fuel cells, etc. can be easily simulated. In addition, the resistor value can be set via the configuration settings of the unit and the communication interface (LAN/USB/RS232C).