RSA5000 Series Real-Time Spectrum Analyzer

Built-in VNA vector network analysis mode (N model)

The VNA mode enables measurement of S11 and S21 of components and circuit networks as well as fault point localization, and more accurately characterizes the network properties of the measured part through various displays such as Smith's Circle Chart and Polar Coordinates.

Discovering transient anomalies with UltraReal technology

The RSA5000 utilizes UltraReal technology to provide a real-time bandwidth of up to 40MHz. Within the real-time bandwidth, it is guaranteed that transient signals with a duration of more than 7.45us can be captured and accurately measured by the 100%.

Identify problems in your design with the vector analysis function

Vector Signal Analysis Function VSA supports a variety of digital modulation formats, such as QAM, PSK, MSK, ASK, FSK and so on. With this function, it can quickly demodulate and display its multi-dimensional data such as constellation diagram, eye diagram (baseband signal), spectrum diagram, demodulation data, etc., so as to find out the problems in the design.

Conducted/radiated pre-testing is accomplished with built-in EMI test software.

The RSA5000 has a built-in EMI pre-testing application, which, in combination with CISPR-compliant filters, pre-tests products for conducted and radiated emissions to identify and improve sources of conducted/radiated nuisance and accelerate time-to-market.

Signal triggering and monitoring via FMT templates

FMT Frequency Template Trigger is a unique trigger mode for real-time spectrum analyzers. You can quickly build templates and accurately locate and trigger signals that match the template rules to detect occasional anomalies in the monitoring range.

Provides multiple interfaces to enhance instrumentation connectivity

Support through the HDMI interface, the device display content to a larger display; provide Web Control function, so that users can access the device IP address, direct control of the device, enhance the use of remote control experience.

Quickly complete operations using the multi-touch screen

You can use the RSA5000 to provide a 10.1-inch multi-touch capacitive screen for quick setup and support multiple gestures such as dragging, expanding, and zooming on waveforms to provide a humanized interactive experience.

7 real-time display modes

Capture, isolate and analyze RF signals and systems more easily with the RSA5000's seven real-time signal display modes. Power versus time and spectrograms show how signals vary with capture time or continuous capture time. Combining these presentations and using markers and triggers in different modes makes the RSA5000 a flexible tool for real-time RF analysis and debugging.

Excellent phase noise metrics

Excellent sweep performance specification with phase noise as low as -108dBc/Hz.