Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
12-bit high-resolution sampling: better rendering of waveform details
The SDS1000X HD adopts a 12-bit analog-to-digital converter, which can achieve 4096 quantization levels, 16 times the signal resolution of traditional 8-bit oscilloscopes. Combined with the excellent noise floor, it can make the captured waveforms more "clean and clear" on the screen, which is conducive to the observation as well as accurate measurement.
Segmented acquisition: efficient capture of anomalies
Segmented acquisition divides the waveform storage space into multiple segments and stores one trigger frame in each segment, which can capture a maximum of 80,000 trigger events and minimize the interval time between trigger events (as small as 2.5 μs) within the Sequence cycle, thus increasing the probability of capturing abnormal events. All waveform segments captured in Sequence mode can be mapped to the screen at once, or played back in a single frame via History.
Math operations: 4-way parallelism improves efficiency
4 independent Math waveforms, support for more than 20 commonly used mathematical operations, in addition to the basic mathematical operations, the oscilloscope also provides derivatives, integrals, logarithms, and other algebraic operations, in addition to supporting the formula editor to customize the expression of the operation, used to achieve the complexity of the nested arithmetic, mathematical operations waveforms and measurements can be used as a parameter for other mathematical operations.
FFT: The perfect combination of time and frequency domains
Hardware-accelerated FFT function, with a maximum number of 2M points, provides superior spectral resolution while still maintaining a high spectral refresh rate. Supports a variety of window functions, normal, average, and maximum hold modes, and automatic marking of peaks and formation of lists.
Rich Trigger Functions: Pinpointing Trigger Events
The SDS1000X HD series provides a variety of trigger modes for precise isolation of signal events of interest. In addition to simple triggers such as edge, slope, pulse width, and under-amplitude, the SDS1000X HD series also supports complex triggering conditions, such as code triggering and video triggering, and is equipped with a wide range of bus protocols, including I2C, SPI, UART, CAN, LIN, CAN FD, and FlexRay, which can help users quickly pinpoint events of interest in complex sampling information. In addition, it also comes with a rich set of bus protocol triggers, including I2C, SPI, CAN, LIN, CAN FD, FlexRay, etc., which can help users to quickly pinpoint the events of interest in the complicated sampling information.
Template testing: high speed verification of product quality
Hardware-based template test function that can perform up to 70,000 tests per second. Generate templates based on user-defined vertical and horizontal tolerances, and determine whether the test fails by comparing whether the signal under test touches the template. Not only can you pre-set the acquisition stop and buzzer alarm when the test fails, but you can also automatically take a screenshot of the failed frames or store them in the history frame, which is very suitable for unattended monitoring of abnormal signals over a long period of time.
Power Analysis: Enabling Power Supply Design and Evaluation
Power analysis function can help users to quickly measure and analyze many items in the field of power electronics, such as power quality, harmonics, inrush current, switching loss, output ripple, transient response, etc. After selecting the power analysis function, you can correctly connect the voltage and current probes according to the connection guide, in addition, together with baudot software, you can also measure and analyze the power loop response, which can be a substitute for expensive network analyzers under certain circumstances. In some cases, it can replace the expensive network analyzer, which can be widely used in the fields of switching power device parameter measurement, power control loop modulation characterization and line power harmonic analysis.
Digital Logic Signal Analysis: Toward Mixed Signal Acquisition and Analysis
The 16-channel logic analyzer probe can add 16 digital channels to the instrument without affecting other test functions, which can quickly solve the problems of analog-digital mixed-signal design and analysis.
25MHz USB Arbitrary Waveform Generator: Save Space Save Budget
The USB Arbitrary Waveform Generator provides 25MHz of predefined waveform outputs, including sine, square, triangle, pulse, noise, DC, and 45 internal arbitrary waveforms, which can also be edited by the user via the EasyWave host software, making it suitable for teaching labs or design labs that are concerned about bench space and budget.
| model number | analog bandwidth | channel number | Maximum real-time sampling rate | Maximum waveform capture rate | Maximum storage depth | vertical resolution | Reference price (including tax) |
|---|---|---|---|---|---|---|---|
| SDS1072X HD | 70 MHz | 2+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥4,580 |
| SDS1074X HD | 70 MHz | 4+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥6,580 |
| SDS1102X HD | 100 MHz | 2+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥5,380 |
| SDS1104X HD | 100 MHz | 4+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥6,680 |
| SDS1202X HD | 200 MHz | 2+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥5,680 |
| SDS1204X HD | 200 MHz | 4+EXT | 2 GSa/s | 500000 wfm/s | 100 Mpts/ch | 12-bit | ¥6,780 |
| Specification | |||
|---|---|---|---|
| bandwidths | 70 MHz, 100 MHz, 200 MHz | Digital channels (standard) | 16 channels, 1 GSa/s sample rate, 10 Mpts/ch memory depth |
| real time sampling rate | 2 GSa/s | mathematical operation | 4-way; 2M-point FFT spectrum analysis; addition, subtraction, multiplication, division, integration, differentiation, square root, averaging, ERES, absolute value, sign, equivalence, inversion, logarithmic, exponential, interpolation, maximum hold, minimum hold, and other time-domain operations; support for formula editor to achieve complex nested operations |
| channel number | 2/4 + EXT | Data analysis and processing tools | Search, navigation, history, template test, baud graph, power analysis (optional), counters |
| Storage depth | 100 Mpts/ch (single channel mode) | connector | SBUS (Siglent Logic Analyzer Interface), USB 2.0 Host x3, USB 2.0 Device, 10M/100M LAN, External Trigger Input, Auxiliary Output (TRIG OUT, PASS/FAIL) |
| Maximum waveform capture rate | 500,000 wfm/s (Sequence mode) | USB Arbitrary Waveform Generator (optional) | Single-channel, maximum output frequency 25MHz, sampling rate 125MSa/s, waveform length 16kpts, isolated output |
| vertical resolution | 12-bit | screen (TV, computer or movie) | 10.1-inch capacitive touchscreen display with 1024*600 resolution |
| Trigger Type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Serial Trigger (IIC, SPI, UART, CAN, LIN) | ||
| Serial data decoding type | Standard: IIC, SPI, UART, CAN, LIN, CAN FD, FlexRay | ||
Recommended
