PCR-LE/LE2 Series High Function AC Stabilized Power Supplies

Supports high power. The combination is free and easy

Using the parallel, single-phase 3-wire, three-phase operation option (extended operation driver board), it is possible to expand the single-phase up to 81 kVA, which can be used as a power supply for large-scale EMC test stations or as a test power supply for high-power industrial air conditioners.

Wide variety of usage methods

Can be used as a master or a slave. It can also be divided and integrated as required.

parallel operation

※The use of an optional expansion board is required.

Models above 2kVA / Maximum number of connected units: 5 units / Maximum expansion capacity: 27kVA single-phase
Simultaneous use of single-phase 3-wire, three-phase operation options allows up to 54kVA for single-phase 3-wire and 81kVA for three-phase.
★Combinations between different models are also possible
Example: PCR2000LE + PCR4000LE + PCR6000LE = single-phase 12kVA

Single-phase 3-wire, three-phase operation

※The use of an optional expansion board is required.

All Models/Max Extended Capacity: 54kVA single-phase 3-wire, 81kVA three-phase
When used with the parallel operation option
★Combinations between different models are also possible!
Example: PCR2000LE + PCR2000LE + PCR4000LE = 3-phase 6kV or 3-phase unbalanced 8kV

"System connection test" with reverse current

In accordance with the Technical Requirements Approach to System Connections

Smart energy aspects

Function controller (test object)

Residential batteries (test article)

EV charging and discharging station (test object)

Smart meters (test objects)

Heat pump (test object)

IEC61000 specification aspects

This system can mimic various phenomena in an AC power environment. Under the following specifications, it can be used for immunity testing of electrical and electronic equipment connected to a low-voltage distribution system and electrical and electronic equipment with a DC power input board. Since test conditions can be set outside the specification range, it can be used for pre-checking tests before specification tests, immunity residual capacity tests, and pressure tests. In addition, the KHA3000 High Harmonic/Flashback Analyzer can be combined with the AC power supply PCR-LE series, the in-line impedance network LIN series, and the application software to perform tests that conform to IEC standards and JIS standards.

SD009-PCR-LE/WE [Quick Immunity Sequencer 2] needs to be configured.

For EV chargers

EV charging system (test object)