News Center

  • How do I use a digital multimeter?

    A digital multimeter is a versatile test and measurement tool that can measure many types of signals. To learn more about how to measure voltage, current, 2-wire resistance, 4-wire resistance, capacitance, temperature, diode and oscillating signal frequencies, as well as how to check for conductivity, visit our blog by clicking the link below. How to use a digital multimeter ,

  • How to read the measurement results of a digital multimeter?

    Most handheld or benchtop digital multimeters display measurements digitally. The number of digits displayed on the screen usually represents the measurement resolution of the digital multimeter. Resolution is the smallest detail that a digital multimeter can quantitatively determine when making a measurement. Therefore, the more digits a digital multimeter displays, the higher its resolution. Handheld digital multimeters are typically capable of displaying three-and-a-half and four...

  • What is a digital multimeter?

    A multimeter is an instrument that can measure a wide range of parameters, such as alternating (AC) or direct current (DC) voltage, AC or DC current, resistance, temperature, capacitance, and so on. Modern digital multimeters use digital and logic technology to become smaller and smaller with more and more built-in functions. By introducing digital technology, digital multimeters can provide graphical displays, data logging and signal digitization as well as...

  • How to use VNA?

    Vector network analyzers measure a wide variety of devices and networks and offer a wide range of measurements for a variety of usage scenarios, such as spectrum analysis, pulse measurements, power amplifier (PA) characterization, and active device testing. The following guide describes how to set up a network analyzer for measurements, calibrate the measurement system, and interpret the measurement results: The uses of VANs are so wide-ranging that each measurement...

  • What does the best network analyzer look like?

    VNA 的选型标准很大程度上取决于应用或使用场景。 通常情况下,选型标准包括频率范围、需要的端口数量(从 2 个到 24个(多端口)乃至 48 个(使用开关矩阵))、输出功率,以及从经济型到手持式再到高端的仪器等级。 矢量网络分析仪既是信号发生器又是接收机...

  • What are the types of network analyzers?

    网络分析仪是用于测量射频和微波器件性能的关键仪器,其类型可根据不同标准分类如下: 网络分析仪的选择需根据测量需求(如频率范围、精度、便携性)和应用场景(研发...

  • How does a vector network analyzer work?

    A network analyzer consists of a signal source and a receiver. The receiver will detect changes in the output signal of the device (or network) and then compare it to the source signal fed into the device. To evaluate the effect of the device on current and voltage, the VNA measures the resulting amplitude and phase response. This results in transmission and reflection measurements, impedance and s-parameters, which can be used by the test engineer to...

  • What are network analyzers used for?

    网络分析仪可执行元器件表征测试。 网络分析仪向射频网络或被测器件(DUT)提供经过校准的激励信号,并通过相位和幅度信息测量频率上的矢量响应。 一台 VNA 即可获得传输(传输系数、插入损耗、增益)、反射(反射系数、VSWR、回波损耗)和阻抗测量结果,以及 s 参...

  • What is VNA?

    Vector network analyzers (VNAs) are test instruments that measure electrical network parameters. They are essential for radio frequency (RF) and microwave component analysis of a wide variety of passive and active devices including filters, antennas and power amplifiers. Network analyzers are ideal for transmission, reflection and impedance measurements as well as s-parameter measurements during design and production. Network analyzers...

  • How do I calibrate my spectrum analyzer?

    You can use the Keysight U9361 RCal Receiver Calibrator to perform an accurate and reliable calibration of your spectrum analyzer/signal analyzer by following these steps: Learn more about how to calibrate a spectrum analyzer. , and

Expand More

Product consultation and purchase:18218718851

I already understand