Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Product Overview: Fluke 705 Loop Calibrator
The new Fluke 705 Loop Calibrator is a cost-effective total solution for current loop calibration, repair and maintenance. Its key features are.
- mA Sources, Simulations and Measurements
- 0.02% accuracy and 0.001 mA resolution
- Simultaneous display of mA reading and percentage reading
- Optional step and ramp outputs
- Provides 24V loop power for mA measurements
- 0-28 DC voltage measurement to check circuit voltage
- Easy battery replacement without opening the cover of the loop calibrator
- Compact design with removable protective sleeve
- Three-year warranty
Product Specification: Fluke 705 Loop Calibrator
| Technical indicators | ||
| Loop Calibrator Current Measurement | Range. | 0 to 24 mA |
| Resolution. | 0.001 mA | |
| Accuracy. | 0.02% reading + 2 ground-most significant bits | |
| Output Current | Scope. | 0 to 20 mA or 4 to 20 mA |
| Accuracy. | 0.025% reading + 2 lowest valid bits | |
| Driving capacity. | 1000 Ω @ 24 mA | |
| Current Simulation. | Scope. | 0 to 20 mA or 4 to 20 mA |
| Accuracy. | 0.025% reading + 2 lowest valid bits | |
| Extended circuit voltage requirements. | 12-30 V | |
| circuit power | When measuring mA, 24 V | |
| Loop Calibrator Voltage Measurement | Range. | 0 to 28 V DC |
| Resolution. | 1 mV | |
| Accuracy. | 0.025% reading + 2 lowest valid bits | |
| Environmental parameters | ||
| Loop Calibrator Operating Temperature | -10 ºC to 55 ºC | |
| Storage temperature | -40 ºC to 60 ºC | |
| Humidity (non-condensing) | 0 to 90% (0 ºC to 35 ºC); 0 to 70% (35 ºC to 55 ºC) | |
| temperature coefficient | -10 ºC to 18 ºC, 28 ºC to 55 ºC, ±.005%/ºC of range | |
| Safety technical parameters | ||
| surety | CSA C22.2 No. 1010.1:1992 | |
| EMC | EN50082-1:1992 and EN55022:1994 Class B | |
| Maximum voltage | 30 V | |
| Mechanical and general parameters | ||
| Loop Calibrator Dimensions | 152 x 70 x 41 mm | |
| Loop Calibrator Weight | 340g | |
| batteries | One 9V battery | |
| Loop Calibrator Warranty | third year | |
| Shock and vibration | Meets the requirements of MIL-T-28800 for Class 2 equipment. | |
| Display current and percentage of full scale | there are | |
| Auto Step, Auto Ramp | there are | |
| Span Check | there are | |
Model: Fluke 705 Loop Calibrator
Fluke 705
Fluke 705 Loop Calibrator
Loop Calibrator includes.
- AC70A Alligator Clip
- C10 Yellow Protective Case with Flex-Stand™
- instruction card
- TL75 Safely Designed Test Lead Sets
