Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
Excellent dynamic characteristics to simulate high speed current variations
The dynamic test function enables the load to switch between two set parameters according to the set rules, thus testing the dynamic characteristics of the device under test.SDL1000X can set the frequency up to 25 kHz in CC dynamic mode, which can be used with the current probe to track the current changes and analyze the current waveform at high speed. In CV mode, the voltage can be set quickly and stably to test the fast output capability of the power supply, and if the instantaneous power exceeds the protection setting value, it will enter the protection state.
Supports 50-step auto-programmed tests
The Program function can simulate five types of tests: CC, CV, CR, CP, and LED. By setting parameters such as the number of steps in the list, storage, and triggering, the load can simulate a total of 10 test files that can be edited, and each test file supports up to 50 steps.
Supports 100-step list testing
The List feature allows loads to build multi-step, timed test environments with different load states. By editing the step value, pulse width and slope of a single step, the load can generate a variety of complex sequence combinations to meet different test requirements.
CR-LED test function
The SDL1000X adds a diode on-state voltage setting to the traditional CR mode, which simulates the real diode's operating state and measures the riffle current during LED testing.
Battery test function
The Battery test function effectively reflects the reliability and remaining life of the battery. Using the CC, CP, and CR modes, the battery can be discharged and tested by setting termination conditions such as termination voltage, discharge capacity, and discharge time.
| model number | Adjustable current rise/fall rate | Readback resolution | Maximum rate for voltage and current testing | CC dynamic mode frequency | Input Range | Reference price (including tax) |
|---|---|---|---|---|---|---|
| SDL1020X-C | 0.001 A/μs ~ 2.5 A/μs | 1 mV, 1 mA | 500 kHz | 15 kHz | 150 V / 30 A / 200 W | e-commerce franchise |
| SDL1030X-C | 0.001 A/μs ~ 2.5 A/μs | 1 mV, 1 mA | 500 kHz | 15 kHz | 150 V / 30 A / 300 W | e-commerce franchise |
| SDL1020X | 0.001 A/μs ~ 2.5 A/μs | 0.1 mV, 0.1 mA | 500 kHz | 25 kHz | 150 V / 30 A / 200 W | ¥5,480 |
| SDL1030X | 0.001 A/μs ~ 2.5 A/μs | 0.1 mV, 0.1 mA | 500 kHz | 25 kHz | 150 V / 30 A / 300 W | ¥7,980 |
| SDL1020X-E | 0.001 A/μs ~ 2.5 A/μs | 1 mV, 1 mA | 500 kHz | 25 kHz | 150 V / 30 A / 200 W | ¥4,080 |
| SDL1030X-E | 0.001 A/μs ~ 2.5 A/μs | 1 mV, 1 mA | 500 kHz | 25 kHz | 150 V / 30 A / 300 W | ¥6,380 |
| Specification | |||
|---|---|---|---|
| exports | SDL1020X/X-E single channel: DC 150 V / 30 A, max. total power 200 W | Readback resolution | SDL1000X: 0.1 mV, 0.1 mA |
| SDL1030X/X-E single channel: DC 150 V / 30 A, max. total power 300 W | SDL1000X-E: 1 mV, 1 mA | ||
| Four models | CC/CV/CR/CP | protective function | Over-voltage, over-current, over-power, over-heat, reverse polarity protection |
| CC dynamic mode | Continuous Mode, Pulse Mode, Flip Mode | Other Functions | List list operation function, automatic test function, battery test function, OCPT/OPPT test function, waveform trend graph function |
| Maximum frequency | CC dynamic mode: 25 kHz | demonstrate | 3.5-inch TFT LCD display, can display multiple parameters and status at the same time |
| CP dynamic mode: 12.5 kHz | connector | Built-in RS232, USB, LAN standard communication interface; | |
| CV dynamic mode: 0.5 Hz | Optional USB-GPIB Adapter Module | ||
| Rate of increase/decrease | 0.001 A/μs~2.5 A/μs | ||
