Comprehensive test and measurement service provider-Shenzhen Weike Electronic Technology Co.
•额定电流AC/DC 20 A
•测量精度（振幅）±0.25%(DC)，±0.21%（50/60 Hz）
-Measurement accuracy (phase) ±0.1° (50/60 Hz)
•频率范围DC～2 MHz
-Use temperature range -40℃～85℃, support various test environments
-Open-ended type for one-handed operation
-Powered by the measuring instrument without sensor power supply (when connected to a HIOKI power analyzer or memory recorder)
-Applicable to EV inverter evaluation and PV power generation PCS evaluation
Basic parameters (1 year guarantee of accuracy, 1 year guarantee of accuracy after adjustment)
| rated current | AC/DC 20 A |
|---|---|
| frequency characteristic | DC〜2 MHz |
| Measurable conductor diameter | φ20 mm or less |
| Maximum Input Current | ±60 Apeak（40°C以下且20ms以内） |
| output voltage | 100 mV/A |
| output resistance | 50 Ω ± 10 Ω |
| Measurement accuracy (amplitude) ± (%of reading+%of full scale) | DC: 0.2% + 0.02% DC < f≦ 100 Hz: 0.2% + 0.01% |
| linearity error | ±20 ppm Typical |
| Common mode voltage rejection ratio (CMRR) | DC-1 kHz：140 dB以上 1 kHz-10kHz：125 dB以上 10 kHz-100 kHz：100 dB以上 100 kHz-1 MHz：80 dB以上 (Effect on output voltage/common mode voltage) |
| Automatic phase compensation function | Automatically performs phase compensation when connected to PW8001 |
| Operating temperature and humidity range | -40°C to 85°C, below 80%RH (uncondensed) |
| Applicable standards | Safety IEC 61010-2-032:2012/EN 61010-2-032:2012 Type D EMC IEC 61326-1:2012/EN 61326-1:2013 |
| pressure resistance | AC 4,260 V |
| power supply | Can be powered by power analyzers PW8001, PW6001, PW3390 or sensor units CT9555, CT9556, CT9557, 3CH current unit U8977 |
| Rated supply voltage | ±11 V to ±15 V |
| Maximum power rating | 5VA以下（20 A/55 Hz，±12 V电源） |
| Volume and weight | 153(W) ×67(H) ×25(D), 370 g |
| thread length | 3 m |
| attachment (email) | -Marker tape (x 6) -carrying case -Instruction manual -Precautions for use |
Recommended
